Avocent KVM over IP switch user manual 4Device Settings, Network

Page 47

8/16 PS/2 KVM over IP switch

display, but small changes in some display regions may not be recognized immediately. A small filter displays all changes instantly but may lead to a constant amount of network traffic even if the display content is not really changing (depending on the quality of the video input signal). All in all the default setting should be suitable for most situations.

• Force Composite Sync (Required for Sun Computers)

To support signal transmission from a Sun machine, enable this option. If not enabled the picture of the remote console will not be visible.

To set the options, click on the button “Apply“.

6.4Device Settings

6.4.1 Network

The Network Settings panel as shown in Figure 6-19 allows changing network related parameters. Each parameter will be explained below. Once applied the new network settings will immediately come into effect.

Figure 6-19. Network Settings

Warning

The initial IP configuration is usually done directly at the host system using the special procedure described in Table 4-1.

Warning

Changing the network settings of the PS/2 IP-KVM switch might result in losing connection to it. In case you change the settings remotely make sure that all the values are correct and you still have an option to access the PS/2 IP-KVM switch.

44

Image 47

Contents Rev USER’S ManualTable of Contents Menu Options Video modes Quick Installation GuideInstallation Initial IP configurationRemote Console Web interface16 PS/2 KVM over IP switch Introduction When the server is up and runningWhen the sever is dead Features Package contents Model No port PS/2 IP-KVM switch Port PS/2 IP-KVM switch Technical specifications Model NoVGA Cable System requirement Model No Ports PS/2 IP-KVM switchModel No Ports PS/2 IP-KVM switch Cable diagrams PS/2 CablePS/2 to DB9 adapter Optional Step Hardware installationConnecting PS/2 IP-KVM switch to the host system Operation OverviewLocal console Internet Connecting the External Reset/Power Option PS/2 IP-KVM switch Setup Tool ConfigurationInitial Configuration Initial configuration via Dhcp serverIP-KVM switch setup tool AuthenticationIP address Initial configuration via serial consoleIP autoconfiguration Keyboard, Mouse and Video configurationAuto mouse speed and mouse synchronization 3.1 PS/2 IP-KVM switch keyboard settingsRemote Mouse Settings Host system mouse settingsSpecial Mouse Driver Windows XP Mouse SettingsSingle and Double Mouse Mode Recommended Mouse SettingsTelnet UsagePrerequisites PC port LED Indication ¾ The Membrane Buttons Port PS/2 IP-KVM Switch¾ 7-Segment Bank LED Indication ¾ Reset Button Bank Bank button and PC 8/16 8/16 buttonKeyboard Hot Key Commands To get out of Auto Scan Mode, Press any key or Space bar To select PC portHot Plug Daisy Chain ConnectionOn Screen Display Operation 16 PS/2 KVM over IP switch Login screen Login into the PS/2 IP-KVM switch and logoutMain NavigationRemote Console General description Logout from the PS/2 IP-KVM switchRemote Console Control Bar Main WindowMonitor Only Exclusive AccessMouse Handling ScalingLocal Cursor Video SettingsBrightness PhaseReset this Mode Reset all ModesSoft Keyboard Save changesUndo Changes 14. Remote Console Confirmation Dialog Remote Console Status LineMenu Options Remote Control KVM Console16 PS/2 KVM over IP switch Users And Groups Change PasswordUser Console KVM Settings15. User Console Settings Part 16 PS/2 KVM over IP switch Keyboard/Mouse 17. Keyboard and Mouse SettingsVideo 18. Video SettingsNetwork 4Device Settings16 PS/2 KVM over IP switch 20. Dynamic DNS Dynamic DNS16 PS/2 KVM over IP switch 22. Device Security SecurityCertificate 23. Certificate Settings24. SSL Certificate Upload 25. Serial Port Serial Port16 PS/2 KVM over IP switch 27. Date and Time Date And Time29. Event Log Event Log16 PS/2 KVM over IP switch Board Summary Device Information32. Event Log List Reset Functions33. Update Firmware Update Firmware34. Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Single port PS/2 KVM over IP Key Codes Table B.1 Key Names Video Modes