Avocent KVM over IP switch ¾ The Membrane Buttons Port PS/2 IP-KVM Switch, PC port LED Indication

Page 23

8/16 PS/2 KVM over IP switch

Figure 5-1. The Internet Explorer displaying the encryption key length

Newer web browsers do support strong encryption on default.

5.2 Using PS/2 KVM over IP switch as a KVM switch

The power on state of 8/16 port PS/2 KVM over IP switch:

When you power on KVM switch, it will ask you the password, the default password value is eight zero –“ 00000000 “. Please key in eight zero and enter the same value at retype field. Note: Before you are not familiar with the operation of OSD manual, please don’t change the password – i.e. keep default eight zero (00000000) value. Otherwise, if you have set the password and unfortunately forget the password, you need send it back to your distributor for maintaining the password.

¾The Membrane Buttons

8 port PS/2 IP-KVM Switch

The Push Buttons 1 ~

8 :

Pressing the individual button to get PC port you want.

16 port PS/2 IP-KVM Switch

	1/9		8/16
	The Push Buttons	~		:

Pressing the individual button to get PC port you want. To press both “Shift “ button and port 1(or port 2,3,4,5,6,7,8) individual button simultaneous to get PC port 9 (10,11,12,13,14,15,16) respectively.

For example: The user would like to switch console port to PC port 12. He can press “Shift“ button and port 4 button simultaneously. The port LED of PC port 12 is lit when the console is switched to PC port 12.

PC port LED Indication :

There are two LEDs--- Power LED (The LED is marked by “ P “) and Link LED (The LED is marked by “ O “ ) accompanied with each PC port.

When you select one of sixteen PC ports and this PC is shut down or this PC port is disconnected to the PC, the selected power port LED is off (But, if this PC is PC99 type, the selected power port LED is lit) and the Link LED is flash. When you select one of sixteen PCs ports and this PC is powered on, the selected port Link LED and power LED is lit.

Note: If there are one of rack mount of KVM switches you used is 16 port IP-KVM switch,

20

Image 23

Contents Rev USER’S ManualTable of Contents Menu Options Video modes Quick Installation GuideInstallation Initial IP configurationRemote Console Web interface16 PS/2 KVM over IP switch Introduction When the server is up and runningWhen the sever is dead Features Package contents Model No port PS/2 IP-KVM switch Port PS/2 IP-KVM switch Technical specifications Model NoVGA Cable System requirement Model No Ports PS/2 IP-KVM switchModel No Ports PS/2 IP-KVM switch Cable diagrams PS/2 CablePS/2 to DB9 adapter Optional Step Hardware installationConnecting PS/2 IP-KVM switch to the host system Operation OverviewLocal console Internet Connecting the External Reset/Power Option PS/2 IP-KVM switch Setup Tool ConfigurationInitial Configuration Initial configuration via Dhcp serverIP-KVM switch setup tool AuthenticationIP address Initial configuration via serial consoleIP autoconfiguration Keyboard, Mouse and Video configurationAuto mouse speed and mouse synchronization 3.1 PS/2 IP-KVM switch keyboard settingsRemote Mouse Settings Host system mouse settingsSpecial Mouse Driver Windows XP Mouse SettingsSingle and Double Mouse Mode Recommended Mouse SettingsTelnet UsagePrerequisites PC port LED Indication ¾ The Membrane Buttons Port PS/2 IP-KVM Switch¾ 7-Segment Bank LED Indication ¾ Reset Button Bank Bank button and PC 8/16 8/16 buttonKeyboard Hot Key Commands To get out of Auto Scan Mode, Press any key or Space bar To select PC portHot Plug Daisy Chain ConnectionOn Screen Display Operation 16 PS/2 KVM over IP switch Login screen Login into the PS/2 IP-KVM switch and logoutMain NavigationRemote Console General description Logout from the PS/2 IP-KVM switchRemote Console Control Bar Main WindowMonitor Only Exclusive AccessMouse Handling ScalingLocal Cursor Video SettingsBrightness PhaseReset this Mode Reset all ModesSoft Keyboard Save changesUndo Changes 14. Remote Console Confirmation Dialog Remote Console Status LineMenu Options Remote Control KVM Console16 PS/2 KVM over IP switch Users And Groups Change PasswordUser Console KVM Settings15. User Console Settings Part 16 PS/2 KVM over IP switch Keyboard/Mouse 17. Keyboard and Mouse SettingsVideo 18. Video SettingsNetwork 4Device Settings16 PS/2 KVM over IP switch 20. Dynamic DNS Dynamic DNS16 PS/2 KVM over IP switch 22. Device Security SecurityCertificate 23. Certificate Settings24. SSL Certificate Upload 25. Serial Port Serial Port16 PS/2 KVM over IP switch 27. Date and Time Date And Time29. Event Log Event Log16 PS/2 KVM over IP switch Board Summary Device Information32. Event Log List Reset Functions33. Update Firmware Update Firmware34. Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Single port PS/2 KVM over IP Key Codes Table B.1 Key Names Video Modes