Motorola SBV5120 manual Setting Up a USB Driver in Windows

Introduction

Installation

Troubleshooting Glossary License

Setting Up a USB Driver in Windows 98

Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted in your CD-ROM drive before you plug in the USB cable. This CD contains the USB drivers and must be inserted and read by the PC before you connect the VoIP cable modem to the PC.

Although your SURFboard VoIP cable modem model number may be different than in the images in this guide, the procedure is the same.

1Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see “Cabling and Startup for a Single User” on page 7. A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:

2Click Next.

3Be sure “Search for the best driver for your device” is selected and click Next.

Home Print

X	10	SBV5120 Series VoIP Cable Modem User Guide
Exit