Motorola SBV5120 manual Setting Up a USB Driver in Windows Me

Introduction

Installation

Troubleshooting Glossary License

Setting Up a USB Driver in Windows Me

Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted into the CD-ROM drive before you plug in the USB cable.

Although your SURFboard VoIP cable modem model number may be different than in the images in this guide, the procedure is the same.

1Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see “Cabling and Startup for a Single User” on page 7. A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:

2Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is successful, the following window is displayed. Otherwise, be sure the SURFboard VoIP Cable Modem CD-ROM is correctly inserted in your CD-ROM drive.

3Click Finish to complete the installation.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in Windows 95, 98, or Windows Me” on page 20.

Home Print

X	14	SBV5120 Series VoIP Cable Modem User Guide
Exit