Motorola SBV5120 manual Setting Up a USB Driver in Windows XP

Introduction

Installation

Troubleshooting Glossary License

Setting Up a USB Driver in Windows XP

Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted into the CD-ROM drive before you plug in the USB cable.

Although your SURFboard VoIP cable modem model number may be different than in the images in this guide, the procedure is the same.

1Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see “Cabling and Startup for a Single User” on page 7. A few seconds after you complete the USB connection, the Found New Hardware Wizard window is displayed:

2Be sure “Install the software automatically” is selected.

3Click Next. Windows automatically searches for the correct USB drivers and installs them.

4Click Finish to complete the installation. Otherwise, be sure the SURFboard VoIP Cable Modem CD-ROM is correctly inserted in your CD-ROM drive.

Home Print

X	18	SBV5120 Series VoIP Cable Modem User Guide
Exit