Motorola SM56 quick start Personal Computer Requirements, Recommended CPUs

Page 3

Personal-computer OEMs that bundle the SM56 can benefit from sizable cost reductions, hardware reduction, and lower power consumption. End users benefit from quick, easy and affordable software upgrades, which help them keep current with the latest communications technology.

Please check with your direct modem supplier for the latest software updates and other product information.

3 Personal Computer Requirements

Motorola performs rigorous, exhaustive testing on its modems. It has developed a list of recommended personal computer features that perform well with the SM56. The information includes qualified CPUs, Level 2 cache requirements, operating systems, RAM requirements, and third-party sound card compatibility. However, in today's dynamic technology markets, it is not possible to test all components and combinations on all systems.

This section outlines minimum system requirements for SM56 operation. On these systems, CPU loading was found to be acceptable and the modem demonstrated good performance over the entire network model.

Important: SM56 operation is not limited to the personal computer systems listed here.

Recommended CPUs

The SM56 modem has been qualified (tested for processor loading and TSB network model coverage) on the following processors:

Intel Pentium, 150MHz with MMX, 256K Level 2 (L2) cache minimum

Intel Pentium, 200MHz, 256K L2 cache minimum

Intel Pentium II

Intel Pentium Pro

Intel Celeron (Pentium II, 266MHz, no L2 cache)

AMD K6-2 with 3DNow!, 256K L2 cache

The SM56 functions satisfactorily on the following systems. However, it has not been fully qualified (it was not tested for processor loading or TSB performance):

AMD K6, 233 MHz, 256K L2 cache

Cyrix MII, 266MHz, 256K L2 cache

The SM56 does not function on the following CPUs, whose floating-point performance is insufficient:

Cyrix MediaGX

Cyrix MediaGXM

Cyrix 6x86

Image 3 Contents
Contents OverviewIntroduction Page Recommended CPUs Personal Computer RequirementsSystem RAM Requirements Preparing the Computer for SM56 InstallationLevel 2 Cache Benefits Compatible Operating SystemsSound Card Compatibility Tapi ConnectorSM56 Hardware Installation Procedure SM56 Pin SignalOn-Board Microphone and Speaker Jacks Installing on Windows 95/98 Installing SM56 Software on Windows 95/98Installing SM56 Software on Windows NT Install a COM port for the modemCOM Port IO Address Run modem diagnostic from the SM56 Control Panel Verifying Proper Modem InstallationVerifying SM56 Software Installation Install the SM56 modem softwareSelect Programs--Accessories--HyperTerminal Changing the Operating SystemVerifying SM56 Hardware Operation Using the SM56 Modem Bit Windows 95/98 ApplicationsDOS-Based Applications and Games Un-installing and Upgrading the SM56 Modem SM56 Un-Install ProcedureSM56 Software Upgrade Procedure Windows 95/98 Recovering From an Unsuccessful Upgrade Windows NT TroubleshootingRecovering From an Unsuccessful Upgrade Windows 95/98 SM56 Software Upgrade Procedure Windows NT∙ The modem installs at COM 5 or higher ∙ There is no dial toneUncheck the Use Automatic Resources check box ∙ The computer runs slower than usual ∙ The modem cannot complete a connection to another modem∙ The modem does not answer incoming calls ∙ The modem disconnects while transmission is in progressSelect If You Have a Hardware Conflict ∙ The modem does not respond to AT commandsSelect Connection ∙ How to Add AT CommandsCheck the Use Error Control-Required to Connect box ∙ The modem connects then meaningless characters appearUnderstanding Microsoft Windows Logo Certification Reporting Problems and Contacting the Modem SupplierAn Overview of the V.90 Protocol Appendix B Software License Agreement Appendix a SM56 SpecificationsPage Readme 04/12/99 JHowley
Related manuals
Manual 22 pages 12.61 Kb Manual 42 pages 37.16 Kb Manual 13 pages 49.27 Kb