Multitech 3100, FR3060 manual Voice/Fax Channels 1

Page 9

Chapter 1 - Introduction and Description

Voice/Fax Channels 1 - 8

Note: the Voice/Fax Channels are not currently supported.

FXS	Foreign Exchange Station. This indicator lights when the voice/fax channel is configured
	for FXS operation.
FXO	Foreign Exchange Office. This indicator lights when the voice/fax channel is configured for
	FXO operation.
E&M	Ear & Mouth Operation. This indicator lights when the voice/fax channel is configured for
	E&M operation.
FAX	Fax. This indicator lights when there is fax traffic on the voice/fax channel.
XMT	Transmit. This indicator lights when voice or fax data is being transmitted.
RCV	Receive. This indicator lights when voice or fax data is being received.
XSG	Transmit Signal. This indicator lights when the FXS-configured channel is off-hook, the
	FXO-configured channel is receiving a ring from the telco, or the M lead is active when the
	voice/fax channel is configured for E&M operation (i.e., the MultiFRAD is receiving a ring
	from the PBX).
RSG	Receive Signal. This indicator lights when the FXS-configured channel is ringing, the FXO-
	configured channel is off-hook, or the E lead is active on the E&M-configured channel.

9

Image 9

Contents Models FR3060/3100 User Guide User Guide Contents Appendices Introduction and Description Preview of this Guide IntroductionRouter Management Composite Link Front Panel DescriptionVoice/Fax Channels 1 Frame Ground GND Connector Power ConnectorInternal Composite Link T1 DSU Connector Monitor XMT/RCV ConnectorVoice/Fax Channels 1 8 Connectors Channels 3 10 ConnectorsCommand Port Technical SpecificationsChannel Connectors Ethernet PortInstallation Unpacking your MultiFRAD Safety WarningsPC or Terminal Units Cabling your MultiFRADMultiFRAD 3000-Series User Guide Software Loading and Configuration Loading your Software Software Loading and Configuration MultiFRAD 3000-Series User Guide Software Loading and Configuration MultiFRAD 3000-Series User Guide Software Loading and Configuration MultiFRAD 3000-Series User Guide Software Loading and Configuration MultiFRAD 3000-Series User Guide MultiFRAD Software Before You Begin Setup Menu IP Setup MultiFRAD Software IPX Setup MultiFRAD Software Spanning Tree Setup Statistics IP Statistics IPX Port Statistics STP Spanning Tree Port Statistics Snmp Statistics WAN Statistics PPP Statistics Data Port Statistics Frame Relay Statistics MultiFRAD 3000-Series User Guide WAN Port Setup Point to Point Setup Frame Relay Setup MultiFRAD 3000-Series User Guide MultiFRAD Software MultiFRAD 3000-Series User Guide Frame Relay Network Data Port Configuration Remote Configuration Modem-Based Remote Configuration Procedure Remote Configuration MultiFRAD 3000-Series User Guide Remote Configuration MultiFRAD 3000-Series User Guide Router Management MultiFRAD Telnet Server Menu Remote User Database MultiFRAD ConfigurationWEB Browser Management Router Management MultiFRAD 3000-Series User Guide Warranty, Service and Tech Support On-line Warranty Registration Limited WarrantyTech Support Recording MultiFRAD InformationContacting Tech Support via E-mail Service Multi-Tech BBSTo log on to the Multi-Tech BBS If you know the file name To Download a fileAbout the Multi-Tech Fax-Back Service About CompuServeAbout the Internet Appendices LAN Cables Appendix a Cabling Diagrams Command Port CableRS232C/V.24 * Link Cable Trunk CableCommand Port Remote Configuration CableAppendix B Regulatory Information Figure B-1. OSI Protocol Stack Appendix C Network OverviewPacket Internet Protocol IP Network AddressIP Addressing MultiFRAD 3000-Series User Guide Glossary MultiFRAD 3000-Series User Guide Glossary MultiFRAD 3000-Series User Guide Glossary MultiFRAD 3000-Series User Guide Glossary MultiFRAD 3000-Series User Guide Glossary MultiFRAD 3000-Series User Guide Glossary Subscriber Loop See Local loop Glossary MultiFRAD 3000-Series User Guide Index LEDs Index Telnet