Multitech MT5634ZBA-USB manual Connect the Modem to Your System, Line Connection, Phone Connection

Page 13

Chapter 2 - Quick Start

Step 3: Connect the Modem to Your System

Placing the modem in a convenient location, connect it to your computer’s USB port, to the telephone line, and, optionally, to your telephone. Figure 2-2 shows the connections.


USB			PHONE LINE

USB Ports

Figure 2-2. MultiModemUSB Cabling (iMacTM)

Line Connection

Plug one end of the line cable into the modem’s LINE jack*, and the other end into a phone line wall jack.

Phone Connection

For voice-only calls (optional), you can plug a telephone into the modem’s PHONE jack*.

*Note: The LINE jack is not interchangeable with the PHONE jack. Do not plug the phone into the LINE jack or the line cable into the PHONE jack.

USB Connection

Plug the Type B (D-shaped) end of the USB cable into the USB connector on the modem, and the Type A (flat) end into a USB port connector on your computer*. See Figure 2-2.

*Note: Do not plug the modem into the USB port on you keyboard—this port is for low power devices such as a mouse.

Once the USB cable is connected, the TR (Terminal Ready) indicator lights, indicating the modem has been recognized by the computer.

13

Image 13

Contents User Guide Trademarks Record of RevisionsContents Index Introduction and Description Product Description IntroductionUniversal Serial Bus USB MT5634ZBA-USB User GuideIntroduction and Description What Is in Your Modem Package?MT5634ZBA-USB User Guide Quick Start What You Will Need Safety WarningsWe supply You supplyQuick Start Assemble the ModemInstall the Software Line Connection Connect the Modem to Your SystemPhone Connection USB ConnectionTest Your Modem Select the ModemFeatures What Can You Do with Your Modem? FeaturesData Required Equipment FaxComputer Telephone LineConnecting to the Telephone Line Line Connecting to the Computer USBConnecting to a Telephone Set Phone ConnectionsFront panel Front PanelMT5634ZBA-USB User Guide AT Commands, S-Registers and Result Codes AT Commands AT Command Summary Echo Command Mode Characters Command DS=n Dial Stored Telephone NumberMonitor Speaker Volume Echo Online Data CharactersReturn Online to Data Mode Monitor Speaker ModeResult Codes Enable/Disable Command Sr=n Set Register ValueCommand Xn Result Code Selection MT5634ZBA-USB User Guide Command Vn Result Code FormatCommand Yn Long Space Disconnect Modem ResetCommand &Gn V.22bis Guard Tone Control Load Factory SettingsCommunications Mode Asynchronous Communications ModeDisplay Current Settings MT5634ZBA-USB User Guide Command &Tn V.54 Test CommandsCommand &Wn Store Current Configuration Select Stored Configuration for Hard ResetModem Port Flow Control Error Correction Mode SelectionData Buffer Control Break ControlCommand %Cn Data Compression Control Inactivity TimerCommand %DCnAT Command Control Protocol Result CodeEnter Setup Password Command %En Fallback and Fall Forward ControlCommand #S=x Store Setup Password Command%%%ATCRRemote Configuration Escape SequenceRegisters S38 S37Rates K56flex Rates S43 S42S48 S89Terse Verbose Description Result CodesMT5634ZBA-USB User Guide Remote Configuration Setup Basic ProcedureChanging the Setup Password Changing the Remote Escape Character Remote ConfigurationMT5634ZBA-USB User Guide Troubleshooting Modem Does Not Respond to Commands None of the Indicators LightModem Dials But Cannot Connect TroubleshootingModem Disconnects While Online Modem Cannot Connect When AnsweringModem Doesn’t Work with Caller ID Fax and Data Software Can’t Run at the Same TimeAppendixes FCC Regulations for Telephone Line Interconnection Appendix a Regulatory ComplianceIndustry Canada Class B StatementFAX Branding Statement Canadian Limitations NoticeInternational Modem Restrictions European DirectivesNew Zealand Telecom Warning Notice Appendix B Technical Specifications Carrier Frequencies ConnectorsITU-T ITU-T V.32bis/V.32 Carrier FrequenciesIndicators DiagnosticsDimensions WeightIntroduction Appendix C Loopback TestsLocal Analog Loopback Test V.54 Loop Figure C-1. Local analog loopback test Test ProcedureAppendix C Loopback Tests Remote Digital Loopback Test V.54 LoopLocal Digital Loopback Test V.54 Loop Figure C-3. Local digital loopback test Test ProcedureLimited Warranty Appendix D Warranty, Service, and Technical SupportOnline Warranty Registration ServiceMulti-Tech BBS Technical SupportTo Log on to the Multi-Tech BBS To Download a FileAbout the Internet About the Multi-Tech Fax-Back ServiceIndex Index MT5634ZBA-USB User Guide