Aiwa NSX-V9000 manual Timer Recording, Prepare the source

Page 20

1

2,4

3

1,2

 

6

 

The unit can be turned on at a specified time every day with the built-in timer.

Preparation

Make sure the clock is set correctly. (See page 5.)

Use the remote control.

1 Press the TIMER button on the remote control once to display 0, and press the II SET button within 4 seconds.

O is displayed, and the hour flashes.

m

If you do not press the II SET button within 4 seconds, another operation may start.

2 Designate the hour of the timer-on time by pressing the 1<< DOWN or WI UP button, and the 11SET button. Repeat to designate the minute of the timer-on time.

After you designate the timer-on time, TIMER and one of the source name flashes alternately on the display for 4 seconds.

3’ Within 4 seconds, press one of the function buttons to select a source.

“TIMER”and the selected source name flash alternately for 4 seconds. At this time, the selected function button does not light up.

●If this step is not completed within 4 seconds, repeat from step 1.

●If the TUNER button is pressed, the band cannot be selected in this step.

‘4 Within 4 seconds, select the duration for the timer-activated period with the l<< DOWN or ml UP button.

The duration for the timer-activated period can beset between 10 and 240 minutes in 10-minute steps.

●If this step is not completed within 4 seconds, repeat from step 1.

5 Prepare the source.

To listen to a CD, load the disc to be played first on tray 1. To listen to a tape, inserl the tape into deck 1 or 2.

To listen to the radio, tune into a station.

6Press the POWER button to turn the unit off after adjusting the volume and tone.

@ remains on the display after the power is turned off (timer standby mode).

When the timer-on time is reached, the unit turns on and begins play with the selected source.

To check the specified time and source

Press the TIMER button on the remote control. The timer-on time and the selected source name are displayed for 4 seconds. However, the duration for the timer-activated period will not be displayed.

TIMER RECORDING

Timer recording is applicable for TUNER and VI DEO/AUX (with an external timer) sources only.

Press the TIMER button twice on the remote control so that Q appears on the display, and press the 11SET button within

4 seconds. Repeat the steps shown above from step 2 and insert the tape to be recorded into deck 2 after step 5.

To cancel timer standby mode temporarily

Press the TIMER button on the remote control so that @ or ~ disappears on the display.

To restore the timer standby mode, press again to display @ or

Using the unit while the timer is set

You can use the unit normally after setting the timer.

Before turning off the power, repeat step 5 to prepare the source, and adjust the volume and tone.

●Timer playback and timer recording will not begin unless the power is turned off.

●Connected equipment cannot be turned on and off by the built- in timer of this unit. Use an external timer.

19 ENGLISH

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DliT!E Table of Contents Outdoor Antem PrecautionsInstillation Connections Connect the right and left speakers to the main unitConnect the surround speakers to the main unit Connect the supplied antennasPO!NTIONING the Speakers Connecting AN Cnjtdoor AntennaRemote Control Setting the Clock Before OperationAdjusting the Sound Press the l Down or H UP button to select t Station Manual TuningDspsurround Presetting Stations Preset Inumber TijningSelecting a preset number on the main unit To clear a preset stationPlaying Discs Basic OperationsLoading Discs Programmed Play Random PlayRepeat Play Music Sensor Inserting TapesPlaying Back a Tape Continuous Play Dolby NR systemInserting Blank Spaces Dubbing a Tape Manually Press the Dolby NR button to turn off the Dolby NRPress the TAPE/DECK 1/2 button to select deck RecordingTo stop recording To clear the edit programTo check the order of the programmed track numbers To add tracks from other discs to the edit programProgrammed Edit Recording Repeat for the rest of the tracks for side aTo stop recording To change the program of each sideConnect your microphones to the MIC 1 and MIC 2 jacks Adjust the echo with the Digital Echo controlVocal Fadefumultiplex Functions Karaoke Programs To add a reservation during playTo check the reserved traclks To skip a trackTimer Recording Prepare the sourceSetting the Sleep Timer Connecting Oiptional EquipmentVIDEO/AUX Jacks Line Ouit JaciksCare and Maintenance Listening to External SourcesPress the VIDEO/AUX button Play the connected equipmentCopyright SpecificationsDolby NR Troubleshooting Guide Parts IndexPage Indice Precauciones Conexiones Conecte Ias antenas suministradasConecte el cable de alimentacion de CA a una toma de CA Antes de conectar el cable de alimentacion de CAConexicn DE UNA ANTENA, Exterior Control RemotoPOSK30NAMIENT0 DE LOS Altavoces Cuando reemplazar Ias pilasPulse el boton II SET Antes DE LA OperacionPara encender la unidad Control DE Volumen Ajuste DEL SonidoSistema BBE ILASonido Ambiental DSP Pulse el boton l Down o Fl UP para seleccionar una emisoraSeleccion de un numero de preajuate en la unidad principal SINTON12!ACION Mediante Numero DE PreajusteRepita Ios pasos 1 y Reproduction DE Discos Operaciones BasicasIntroduction DE Discos Reprcduccion Aleatoria Repetition DE ReproductionReproduction Programada Pulse dos veces el boton Prgm estando en el modo de paradaInsercion DE Cintas Reproduction DE UNA CintaSensor Musical Para seleccionar un modo de inversion platina 2 solamenteReproduction Continua Sistema Dolby NRGrabacion Basica Insercion DE Espacios SIN GrabarInserte la cinta que vaya a grabar en la platina Pulse el boton Dolby NR para activar o desactivar Dolby NRCopiado Manual DE UNA Cinta Copiado DE Toda LA CintaPara afiadir canciones de otros discos a un programa Para detener la grabacionPara borrar el programa de edition Grabacion CON Edicion Programada Para detener la grabacithPara cambiar el programa de cada cara Para borrar el programa de editionAjuste el eco con el control Digital Echo Mezcla MicrofonicaConecte sus microfonos a Ias tomas MIC Y Para complrobar Ias canciones resewadas Programas DE KaraokePulse el boton Prgm una vez Para escuchar la radio, sintonice una emisora Grabacion CON TemporizadorPrepare la fuente de sonido Ajuste DEL Temporizador Para Dormir OpcionalTomas VIDEO/AUX Tomas Line OUTEscucha DE Fuentes DE Sonido Externas Cuidados Y MantenimientoESP’ECIFICACIONES DerechosBBE Page Table DES Matieres Installation Dommaae necessitant une reparationCordon d’alimentation secteur NeccodenationaldelegtriciteConnexions Avant de brancher Ie cordon secteurConnecter Ies enceintes surround a I’appareil principal Connecter Ies antennes fourniesTelecommande Connexion D’UNE Antenne ExterieurePositionnement DES Enceintes Pour positioner Ies antennes Antenne FM interieureAvant L’UTILISATION REGLAGEDEL’HORLOGEApr@sI’utilisation Appuyer sur la touche 11 SETReglage DU SON Pour annuler Ie mode selectionne Systeme Surround DSPQuand la source musicale est monophonique Quand une emission FM stereo presente des parasitesMemorisation DE Stations Accord SUR UNE Station MemoriseeSelectionn.er une gamme Repeter Ies etapes 1 etSelection d’une plage avec la telecommande Mise EN Place DE DisquesLecture DE Disques Pour verifier Ie temps restantAppuyer deux fois sur la touche Prgm clans Ie mode arr~t Lecture AleatoireLecture Repetee Lecture ProgrammedOperations DE Base Mise EN Place DE CassettesLecture D’UNE Cassette Senseur DE MusiqueLecture Continue Au sujet des cassettesLe ruban magnetique des cassettes de 120 minutes Systeme r6ducteur de bruit DolbyPour demarrer I’enregistrement avec la telecommande Enregistrement DE BaseInsertion D’ESPACES Blancs Inserer la cassette a enregistrer clans la piatinePour arr6ter ia duplication Duplication Manuelle D’UNE CassetteDuplication DE LA Totalite ’UNE Cassette Enregistrement Avec Montage ET Calcul DU Temps Enregistrement Avec Montage Programme Repeter i’6tape 5 pour Ie reste des plages de la face aBrancher Ies microphones aux prises MIC 1 et Mixage Avec MicrophoneFonctions Vocal Fadefumultiplex Pour contr61er Ies plages reservees Quand on utilise la telecommandePfiogrammes DE Karaoke Preparer la source Enregistrement Commande PAR LA MinuterieReglage DE LA Minuterie Prises L!NE OUT ’ARRETPrises VIDEO/AUX Nettoyage du coffret Ecoute DE Sources Externes Soins ET EntretienMettre I’appareil connecte en marche Droits D’AUTEUR Enceintes Acoustiques SX-NAV900Reducteur DE Bruit Dolby Down GeneralitiesPartie Tuner Partie Magnetocassette

NSX-V9000 specifications

The Aiwa NSX-V9000 is a standout component in the realm of audio systems, particularly known for its remarkable blend of robust design, versatile functionality, and innovative technology. Released in the late 1990s, this audio system quickly gained a reputation for delivering high-fidelity sound and a rich feature set that appealed to both casual listeners and audiophiles alike.

One of the most notable features of the NSX-V9000 is its powerful 200-watt amplification system. This ensures that the audio output remains clear and distortion-free, even at higher volumes. The dual cassette decks allow users to easily record from various sources and create mixtapes, making it a favorite among enthusiasts who cherish the analog experience. The inclusion of automatic tape selection and playback features adds convenience to the overall user experience.

Moreover, the NSX-V9000 boasts a 5-disc CD changer, enabling seamless playback of multiple CDs without the need for manual swapping. This functionality is complemented by its advanced programming options and random play features, allowing users to create personalized playlists effortlessly. The system also supports an array of audio formats, making it versatile in accommodating different media types.

Connectivity is another highlight of the Aiwa NSX-V9000. It comes equipped with multiple input and output options, including AUX, USB, and headphone outputs, allowing users to easily connect external devices such as smartphones, MP3 players, and computers. This feature supports the modern lifestyle, where digital music consumption is commonplace.

The NSX-V9000 is designed with user-friendly controls and an intuitive interface. Its large LCD screen displays track information and other relevant data, simplifying navigation through extensive libraries. The inclusion of remote control functionality further enhances user convenience, enabling operation from a distance.

Additionally, Aiwa integrated several sound-enhancing technologies within the NSX-V9000. The system features Digital Signal Processing (DSP) capabilities that allow users to experiment with different equalizer settings, giving them the freedom to tailor the audio experience to their preferences. Surround sound options create an immersive listening environment, making it ideal for both music and movie playback.

In summary, the Aiwa NSX-V9000 is a multifunctional audio system that combines power, versatility, and technological innovation. Its solid amplification, multi-format playback capabilities, and user-friendly interface make it a timeless choice for music lovers seeking a high-quality audio experience. Whether for casual listening or serious audiophile use, the NSX-V9000 remains a noteworthy contender in the world of home audio systems.
Top Page Image Contents