Aiwa NSX-V9000 manual Troubleshooting Guide, Parts Index

Page 24

TROUBLESHOOTING GUIDE

If the unit fails to perform as described in these Operating Instructions, check the following guide.

GENERAL

There is no sound.

●Is the AC cord connected properly?

●Is there a bad connection? (+ page 3)

●There may be a shofl, circuit in the speaker terminals.

+Disconnect the AC cord, then correct the speaker connections.

●Was an incorrect function button pressed?

Sound is emitted from one speaker only.

●Is the other speaker disconnected?

The output sound is not stereo.

●Is the Karaoke function turned on? (+ page 17)

An erroneous display or a malfunction occurs.

+Reset the unit as stated below.

TUNER SECTION

There is constant, wave-like static.

●Is the antenna connected properly? (+ page 3)

●Is the signal weak?

+ Connect an outdoor antenna.

The reception contains noise interferences or the sound is distorted.

●Is the system picking up external noise or multipath distortion?

+Change the orientation of the antenna.

+Move the unit away from other electrical appliances.

CASSETTE DECK SECTION

The tape does not run.

●Is deck 2 in pause mode? (+ page 11)

The sound is off-balance or not adequately high.

●Is the playback head dirty? (+ page 21)

Recording is not possible.

●Is the erasure prevention tab on the tape broken off? (+ page 12)

●Is the recording head dirty? (+ page 21)

Erasure is not possible.

●Is the erasure head dirty? (+ page 21)

●Is a metal tape being used?

High frequency sound is not emitted.

●Is a tape recorded without Dolby NR played back with the Dolby NR system operating? (+ page 11)

●Is the recording/playback head dirty? (+ page 21)

CD PLAYER SECTION

The CD player does not play.

*Is the disc correctly inserted? (+ page 9) ● Is the disc dirty? (+ page 21)

● Is the lens affected by condensation?

+Wait approximately one hour and try again.

To reset

If an unusual condition occurs in the display window or the cassette decks, reset the unit as follows.

1Press the POWER button to turn off the power.

2Press the POWER button to turn the power back on while pressing the ■ CLEAR button. Everything stored in memory after purchase is canceled.

If the power cannot be turned off in step 1 because of a malfunction, reset by disconnecting the AC cord and repeat step 2.

PARTS INDEX

Instructions about each part on the main unit or remote control are indicated on the pages listed below.

(in alphabetic order)

Parts

 

Pages

BBE

 

6

 

 

 

9

%

EDIT/CHECK (EDIT/CHECK)

9, 15, 16

W CLEAR

 

8,9,11

CLOCK

 

5

DEMO

 

5

DIGITAL ECHO

17

+>

DIRECTION/PRESET

8, 9, 11

DISC CHANGE

9

DISC DIRECT PLAY

9

DOLBY NR

12

<<,

1<< DOWN

7,9,11

EDIT/CHECK (CD EDIT/CHECK)

9, 15, 16

SURROUND

7

GEQ

 

6

KARAOKE

(VOCAL FADEIWMULTIPLEX)

17

KARAOKE

ENTER

18

MIC 1, MIC2

17

MIC MIXING

17

A opEN/CLOSE

9

 

 

 

PHONES

 

6

POWER

 

5

PRGM

 

10

RANDOM

 

10

● (0/0)

REC/REC MUTE

13

REPEAT/MONO TUNER

7,”10

REV MODE (DECK 2)

11

II SET

 

8, 9

SLEEP

 

20

SYNC DUB NORMAIJHIGH

14

TAPE/DECK 1/2

11, 13

T-BASS

 

6

TIMER

 

19

TUNE FVBAND

7

➤>1, ➤>

UP

7,9,11

VI DEO/AUX

21

VOCAL FADEWMULTIPLEX (KARAOKE)

17

VOLUME

 

6

0-9, +10

 

10

23 ENGLISH

Page 23 Page 25
Image 24
Page 23 Page 25
Contents DliT!E Table of Contents Precautions InstillationOutdoor Antem Connections Connect the right and left speakers to the main unitConnect the surround speakers to the main unit Connect the supplied antennasConnecting AN Cnjtdoor Antenna Remote ControlPO!NTIONING the Speakers Setting the Clock Before OperationAdjusting the Sound Manual Tuning DspsurroundPress the l Down or H UP button to select t Station Presetting Stations Preset Inumber TijningSelecting a preset number on the main unit To clear a preset stationBasic Operations Loading DiscsPlaying Discs Random Play Repeat PlayProgrammed Play Inserting Tapes Playing Back a TapeMusic Sensor Continuous Play Dolby NR systemInserting Blank Spaces Dubbing a Tape Manually Press the Dolby NR button to turn off the Dolby NRPress the TAPE/DECK 1/2 button to select deck RecordingTo stop recording To clear the edit programTo check the order of the programmed track numbers To add tracks from other discs to the edit programProgrammed Edit Recording Repeat for the rest of the tracks for side aTo stop recording To change the program of each sideAdjust the echo with the Digital Echo control Vocal Fadefumultiplex FunctionsConnect your microphones to the MIC 1 and MIC 2 jacks Karaoke Programs To add a reservation during playTo check the reserved traclks To skip a trackTimer Recording Prepare the sourceSetting the Sleep Timer Connecting Oiptional EquipmentVIDEO/AUX Jacks Line Ouit JaciksCare and Maintenance Listening to External SourcesPress the VIDEO/AUX button Play the connected equipmentSpecifications Dolby NRCopyright Troubleshooting Guide Parts IndexPage Indice Precauciones Conexiones Conecte Ias antenas suministradasConecte el cable de alimentacion de CA a una toma de CA Antes de conectar el cable de alimentacion de CAConexicn DE UNA ANTENA, Exterior Control RemotoPOSK30NAMIENT0 DE LOS Altavoces Cuando reemplazar Ias pilasAntes DE LA Operacion Para encender la unidadPulse el boton II SET Control DE Volumen Ajuste DEL SonidoSistema BBE ILASonido Ambiental DSP Pulse el boton l Down o Fl UP para seleccionar una emisoraSINTON12!ACION Mediante Numero DE Preajuste Repita Ios pasos 1 ySeleccion de un numero de preajuate en la unidad principal Operaciones Basicas Introduction DE DiscosReproduction DE Discos Reprcduccion Aleatoria Repetition DE ReproductionReproduction Programada Pulse dos veces el boton Prgm estando en el modo de paradaInsercion DE Cintas Reproduction DE UNA CintaSensor Musical Para seleccionar un modo de inversion platina 2 solamenteReproduction Continua Sistema Dolby NRGrabacion Basica Insercion DE Espacios SIN GrabarInserte la cinta que vaya a grabar en la platina Pulse el boton Dolby NR para activar o desactivar Dolby NRCopiado Manual DE UNA Cinta Copiado DE Toda LA CintaPara detener la grabacion Para borrar el programa de editionPara afiadir canciones de otros discos a un programa Grabacion CON Edicion Programada Para detener la grabacithPara cambiar el programa de cada cara Para borrar el programa de editionMezcla Microfonica Conecte sus microfonos a Ias tomas MIC YAjuste el eco con el control Digital Echo Programas DE Karaoke Pulse el boton Prgm una vezPara complrobar Ias canciones resewadas Grabacion CON Temporizador Prepare la fuente de sonidoPara escuchar la radio, sintonice una emisora Ajuste DEL Temporizador Para Dormir OpcionalTomas VIDEO/AUX Tomas Line OUTEscucha DE Fuentes DE Sonido Externas Cuidados Y MantenimientoESP’ECIFICACIONES DerechosBBE Page Table DES Matieres Installation Dommaae necessitant une reparationCordon d’alimentation secteur NeccodenationaldelegtriciteConnexions Avant de brancher Ie cordon secteurConnecter Ies enceintes surround a I’appareil principal Connecter Ies antennes fourniesTelecommande Connexion D’UNE Antenne ExterieurePositionnement DES Enceintes Pour positioner Ies antennes Antenne FM interieureAvant L’UTILISATION REGLAGEDEL’HORLOGEApr@sI’utilisation Appuyer sur la touche 11 SETReglage DU SON Pour annuler Ie mode selectionne Systeme Surround DSPQuand la source musicale est monophonique Quand une emission FM stereo presente des parasitesMemorisation DE Stations Accord SUR UNE Station MemoriseeSelectionn.er une gamme Repeter Ies etapes 1 etSelection d’une plage avec la telecommande Mise EN Place DE DisquesLecture DE Disques Pour verifier Ie temps restantAppuyer deux fois sur la touche Prgm clans Ie mode arr~t Lecture AleatoireLecture Repetee Lecture ProgrammedOperations DE Base Mise EN Place DE CassettesLecture D’UNE Cassette Senseur DE MusiqueLecture Continue Au sujet des cassettesLe ruban magnetique des cassettes de 120 minutes Systeme r6ducteur de bruit DolbyPour demarrer I’enregistrement avec la telecommande Enregistrement DE BaseInsertion D’ESPACES Blancs Inserer la cassette a enregistrer clans la piatineDuplication Manuelle D’UNE Cassette Duplication DE LA Totalite ’UNE CassettePour arr6ter ia duplication Enregistrement Avec Montage ET Calcul DU Temps Enregistrement Avec Montage Programme Repeter i’6tape 5 pour Ie reste des plages de la face aMixage Avec Microphone Fonctions Vocal FadefumultiplexBrancher Ies microphones aux prises MIC 1 et Quand on utilise la telecommande Pfiogrammes DE KaraokePour contr61er Ies plages reservees Enregistrement Commande PAR LA Minuterie Reglage DE LA MinuteriePreparer la source ’ARRET Prises VIDEO/AUXPrises L!NE OUT Ecoute DE Sources Externes Soins ET Entretien Mettre I’appareil connecte en marcheNettoyage du coffret Enceintes Acoustiques SX-NAV900 Reducteur DE Bruit DolbyDroits D’AUTEUR Down GeneralitiesPartie Tuner Partie Magnetocassette

NSX-V9000 specifications

The Aiwa NSX-V9000 is a standout component in the realm of audio systems, particularly known for its remarkable blend of robust design, versatile functionality, and innovative technology. Released in the late 1990s, this audio system quickly gained a reputation for delivering high-fidelity sound and a rich feature set that appealed to both casual listeners and audiophiles alike.

One of the most notable features of the NSX-V9000 is its powerful 200-watt amplification system. This ensures that the audio output remains clear and distortion-free, even at higher volumes. The dual cassette decks allow users to easily record from various sources and create mixtapes, making it a favorite among enthusiasts who cherish the analog experience. The inclusion of automatic tape selection and playback features adds convenience to the overall user experience.

Moreover, the NSX-V9000 boasts a 5-disc CD changer, enabling seamless playback of multiple CDs without the need for manual swapping. This functionality is complemented by its advanced programming options and random play features, allowing users to create personalized playlists effortlessly. The system also supports an array of audio formats, making it versatile in accommodating different media types.

Connectivity is another highlight of the Aiwa NSX-V9000. It comes equipped with multiple input and output options, including AUX, USB, and headphone outputs, allowing users to easily connect external devices such as smartphones, MP3 players, and computers. This feature supports the modern lifestyle, where digital music consumption is commonplace.

The NSX-V9000 is designed with user-friendly controls and an intuitive interface. Its large LCD screen displays track information and other relevant data, simplifying navigation through extensive libraries. The inclusion of remote control functionality further enhances user convenience, enabling operation from a distance.

Additionally, Aiwa integrated several sound-enhancing technologies within the NSX-V9000. The system features Digital Signal Processing (DSP) capabilities that allow users to experiment with different equalizer settings, giving them the freedom to tailor the audio experience to their preferences. Surround sound options create an immersive listening environment, making it ideal for both music and movie playback.

In summary, the Aiwa NSX-V9000 is a multifunctional audio system that combines power, versatility, and technological innovation. Its solid amplification, multi-format playback capabilities, and user-friendly interface make it a timeless choice for music lovers seeking a high-quality audio experience. Whether for casual listening or serious audiophile use, the NSX-V9000 remains a noteworthy contender in the world of home audio systems.
Top Page Image Contents