Advantech PCM-3601 user manual Copyright notice

Page 2

Copyright notice

This document is copyrighted, 2000, by Advantech Co., Ltd. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties which may result from its use.

Acknowledgements

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc.

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation. Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows ® is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semiconductor Co., Ltd.

C&T is a trademark of Chips and Technologies, Inc.

UMC is a trademark of United Microelectronics Corporation.

Winbond is a trademark of Winbond Electronics Corp.

STPC is a trademark of SGS Thomson Corp.

For more information on this and other Advantech products, please visit our website at:

http://www.advantech.com

For technical support and service, please visit our support website at:

http://www.advantech.com/support

This manual is for the PCM-3601.

Part No. 2006360100

1st Edition Printed in Taiwan June 2000

2

Image 2

Contents PCM-3601 Copyright notice Chapter Unpacking and InstallationFeature Fdsp Full -duplex speakerphone Data modem throughput up to 115.2K bpsNvram directory and stored profiles Error Correction & Data CompressionVoice/audio mode PackageUnpacking the Modem Look at the Modem CardPC/104 FaxModem Card Serial Port and Interrupt of the Modem Card Setting the COM Port and Interrupt of the Modem CardInstalling the Modem Card Testing the Telephone Line Prior to Connection Communications Software ConfigurationSoftware Configuration Tips AT&P0DP Getting StartedData Format Modem FundamentalsModem Basics Communications Protocol Speeds of the ModemOn-Line Speed DCE Speed Serial Port Speed DTE SpeedError-Correction and Data Compression Ecdc Flow Control Non-Volatile Memory NvramMajor Stored Configuration Profile Major SCP Factory Default Profile FDPStored Configuration Profile SCP Active Configuration Area ACAStored Telephone Numbers STN Escape Sequence +++ Command State and Data StateModem Operation and Response Codes Deleting Commands Issuing CommandsCommand Buffer Modem AT Response Codes Dial Commands and Dial Modifiers AT CommandsPrefix, Repeat and Escape Commands Operation CommandsW1 Enable V.42 response codes, display DCE speed M0 Set modem for async operation P0 M/B ratio 39/61USA Lease Line Backup Dial Line command set Option Call Back Security Command Set OptionLease Line/Dial Line command set Option Display Dialing Number if AT&In Command supportOption Auto Dial/Redial mode Option42bis and MNP Command Set Break ControlData Compression Ecdc Operation Mode SelectionMNP Response Code Option Automatic RetrainRegister Summary Appendix aModem Register 1711h XON Character S33 255 Appendix B Result Codes+FCERROR Short Form Long Form Appendix C Fax Command Codes Fax ClassFax Class II Commands +FDIS Installation of Modem Driver in Win 95/98 Appendix D