Advantech PCM-3601 user manual Appendix D, Installation of Modem Driver in Win 95/98

Page 35

Appendix D

Installation of Modem Driver in Win 95/98

STEP 1.

Turn on computer. Move mouse to “Start” at left hand side, enter “Setting-s” and select “Control panel” go to Next Windows.

STEP 2.

Under “Control Panel” select “Modems”. (or Move mouse to “My computer” at right hand side, enter “Control panel and Modems”.)

STEP 3.

In Install New Modem, please tick “Don‘t detect my modem; I will select it from a lost”, and then go to next step.

STEP 4.

Because the modem is not listed, you click “Have Disk” for other modem models.

STEP 5.

Insert the installation disk or CD-ROM into the driver selected, click “Browse”, select one of the PCM-3601.inf files.

STEP 6.

Click the manufacturer and model of your modem, please select it and then go to next step.

STEP 7.

Select the port to use with this modem, for example the modem setting COM port, and then click “Next”.

STEP 8.

Your modem has been set up successfully. Click “Finish”.

STEP 9.

Select the modem you have, and then click “Close”.

Page: 34

Image 35

Contents PCM-3601 Copyright notice Data modem throughput up to 115.2K bps Unpacking and InstallationFeature Fdsp Full -duplex speakerphone ChapterPackage Error Correction & Data CompressionVoice/audio mode Nvram directory and stored profilesLook at the Modem Card Unpacking the ModemPC/104 FaxModem Card Serial Port and Interrupt of the Modem Card Setting the COM Port and Interrupt of the Modem CardInstalling the Modem Card Communications Software Configuration Testing the Telephone Line Prior to ConnectionSoftware Configuration Tips Getting Started AT&P0DPData Format Modem FundamentalsModem Basics Speeds of the Modem Communications ProtocolSerial Port Speed DTE Speed On-Line Speed DCE SpeedError-Correction and Data Compression Ecdc Non-Volatile Memory Nvram Flow ControlActive Configuration Area ACA Factory Default Profile FDPStored Configuration Profile SCP Major Stored Configuration Profile Major SCPStored Telephone Numbers STN Escape Sequence +++ Command State and Data StateModem Operation and Response Codes Deleting Commands Issuing CommandsCommand Buffer Modem AT Response Codes Operation Commands AT CommandsPrefix, Repeat and Escape Commands Dial Commands and Dial ModifiersW1 Enable V.42 response codes, display DCE speed M0 Set modem for async operation P0 M/B ratio 39/61USA Lease Line Backup Dial Line command set Option Call Back Security Command Set OptionLease Line/Dial Line command set Option Auto Dial/Redial mode Option Display Dialing Number if AT&In Command supportOptionSet Break Control 42bis and MNP CommandAutomatic Retrain Ecdc Operation Mode SelectionMNP Response Code Option Data CompressionRegister Summary Appendix aModem Register 1711h XON Character S33 255 Result Codes Appendix B+FCERROR Short Form Long Form Appendix C Fax Command Codes Fax ClassFax Class II Commands +FDIS Appendix D Installation of Modem Driver in Win 95/98