Advantech PCM-3601 user manual Unpacking the Modem, Look at the Modem Card

Page 5

- Working Currency	: 350mA (max)
- Working Voltage	: DC +5V	: +5.50V ~ +4.50V
	: DC+12V	: +15V ~ 9V
- Working Temperature : 0 – 70 ℃
- Ring Spec.	: Fq=15Hz ~ 71Hz, V=35Vrms (above)
- Tone Spec.	: HGF=-4, LGF=-6, ±2db
	: HGF=-9, LGF=-11, ±2db(CTR21)
- Pulse Spec.	: M.B.R=39 ±2 , P.P.S=10 ±0.5
- PCB Size	: 96mm X 90mm

EMC & PTT Support: FCC Part15 & Part68/CE/CTR21(Option)

1.2Unpacking the Modem

The complete modem package should include:

1)The modem unit.

2)This user manual.

3)An RJ-11 to RJ-11 phone cable.

4)Data and fax communications software (Optional).

5)Windows 95/98 Driver

Carefully inspect the package for shipping damage. If damage is found, repack the modem in the original packing material and contact your dealer.

1.3A Look at the Modem Card

Phone: Accepts a Telephone set Connected Parallel to your Modem.

Line: Accepts the RJ-11 Cable that links your Modem to a Telephone line or to a 2-Wire Leased-Line.

PC/104: The PC/104 connectors give you the flexibility to attach PC/104 modules.

Page: 3

Image 5

Contents PCM-3601 Copyright notice Feature Fdsp Full -duplex speakerphone Unpacking and InstallationChapter Data modem throughput up to 115.2K bpsVoice/audio mode Error Correction & Data CompressionNvram directory and stored profiles PackageLook at the Modem Card Unpacking the ModemPC/104 FaxModem Card Serial Port and Interrupt of the Modem Card Setting the COM Port and Interrupt of the Modem CardInstalling the Modem Card Communications Software Configuration Testing the Telephone Line Prior to ConnectionSoftware Configuration Tips Getting Started AT&P0DPData Format Modem FundamentalsModem Basics Speeds of the Modem Communications ProtocolSerial Port Speed DTE Speed On-Line Speed DCE SpeedError-Correction and Data Compression Ecdc Non-Volatile Memory Nvram Flow ControlStored Configuration Profile SCP Factory Default Profile FDPMajor Stored Configuration Profile Major SCP Active Configuration Area ACAStored Telephone Numbers STN Escape Sequence +++ Command State and Data StateModem Operation and Response Codes Deleting Commands Issuing CommandsCommand Buffer Modem AT Response Codes Prefix, Repeat and Escape Commands AT CommandsDial Commands and Dial Modifiers Operation CommandsW1 Enable V.42 response codes, display DCE speed M0 Set modem for async operation P0 M/B ratio 39/61USA Lease Line Backup Dial Line command set Option Call Back Security Command Set OptionLease Line/Dial Line command set Option Auto Dial/Redial mode Option Display Dialing Number if AT&In Command supportOptionSet Break Control 42bis and MNP CommandMNP Response Code Option Ecdc Operation Mode SelectionData Compression Automatic RetrainRegister Summary Appendix aModem Register 1711h XON Character S33 255 Result Codes Appendix B+FCERROR Short Form Long Form Appendix C Fax Command Codes Fax ClassFax Class II Commands +FDIS Appendix D Installation of Modem Driver in Win 95/98