Advantech PCM-3601 user manual 1711h XON Character S33 255

Page 29

Register	Range	Units	Default	Function
S25	0-255	s or 0.01s	5	Delay to DTR Off
S26	0-255	0.01s	1	RTS-to-CTS Delay
S27	-	-	73(49h)	General Bit Mapped Options Status
S28	-	-	0	General Bit Mapped Options Status
S29	0-255	10ms	70	Flash Dial Modifier Time
S30	0-255	10s	0	Disconnect Inactivity Timer
S31	-	-	194(C2h)	General Bit Mapped Options Status
S32	0-255	ASCII	17(11h)	XON Character
S33	0-255	ASCII	19(13h)	XOFF Character
S34-S35	-	-	-	Reserved
S36	-	-	7	LAPM Failure Control
S37	-	-	0	Line Connection Speed
S38	0-255	s	20	Delay Before Forced Hang-up
S39	-	-	3	Flow Control Bit Mapped Options
				Status
S40	-	-	168(a8h)	General Bit Mapped Options Status
S41	-	-	195(C3h)	General Bit Mapped Options Status
S42-S45	-	-	-	Reserved
S46	-	-	138	Data Compression Control
S48	-	-	7	V.42 Negotiation Control
S82	-	-	128(40h)	LAPM Break Control
S86	0-255	-	-	Call Failure Reason Code
S91	0-15	dBm	10(country	PSTN Transmit Attenuation Level
			dependent)
S92	0-15	dBm	10(country	Fax Transmit Attenuation Level
			dependent)
S95	-	-	0	Result Code Messages Control

♦ Register value may be stored in one of two user profiles with the &W command.

Page: 28

Image 29

Contents PCM-3601 Copyright notice Feature Fdsp Full -duplex speakerphone Unpacking and InstallationChapter Data modem throughput up to 115.2K bpsVoice/audio mode Error Correction & Data CompressionNvram directory and stored profiles PackageLook at the Modem Card Unpacking the ModemPC/104 FaxModem Card Serial Port and Interrupt of the Modem Card Setting the COM Port and Interrupt of the Modem CardInstalling the Modem Card Communications Software Configuration Testing the Telephone Line Prior to ConnectionSoftware Configuration Tips Getting Started AT&P0DPData Format Modem FundamentalsModem Basics Speeds of the Modem Communications ProtocolSerial Port Speed DTE Speed On-Line Speed DCE SpeedError-Correction and Data Compression Ecdc Non-Volatile Memory Nvram Flow ControlStored Configuration Profile SCP Factory Default Profile FDPMajor Stored Configuration Profile Major SCP Active Configuration Area ACAStored Telephone Numbers STN Escape Sequence +++ Command State and Data StateModem Operation and Response Codes Deleting Commands Issuing CommandsCommand Buffer Modem AT Response Codes Prefix, Repeat and Escape Commands AT CommandsDial Commands and Dial Modifiers Operation CommandsW1 Enable V.42 response codes, display DCE speed M0 Set modem for async operation P0 M/B ratio 39/61USA Lease Line Backup Dial Line command set Option Call Back Security Command Set OptionLease Line/Dial Line command set Option Auto Dial/Redial mode Option Display Dialing Number if AT&In Command supportOptionSet Break Control 42bis and MNP CommandMNP Response Code Option Ecdc Operation Mode SelectionData Compression Automatic RetrainRegister Summary Appendix aModem Register 1711h XON Character S33 255 Result Codes Appendix B+FCERROR Short Form Long Form Appendix C Fax Command Codes Fax ClassFax Class II Commands +FDIS Appendix D Installation of Modem Driver in Win 95/98