Advantech PCM-3601 Call Back Security Command Set Option, Lease Line/Dial Line command set Option

Page 24

4.4 Call Back Security Command Set			Option
$DTXCn	n=0,	1,2
	n=0	Disable Call Back Security (Default)
	n=1	Enable Call Back Security
	n=2	Display current status
$DTXP=XXXXXXXX Set Password (MAX 8 chars)
	P?	Display Password
$DTXN=n	Set call back redial count (n=1~31 default: 3)
	N?	Display call back redial count
$DTXT0=n Set call back delay time
	T?	Display call back delay time (n=10~255 Sec.
		Default: 10)
$DTXT1=n Set time-out time
	T?	Display time-out time (n=30~255 Sec. Default:
		60)

4.5	Lease Line/Dial Line command set	Option
&Ln	n=0,1
&L0	Disable Lease Line mode, select dial line mode.
	(Default)
&L1	Disable Dial line mode, select lease line mode.

4.6 Lease Line Backup Dial Line command set		Option
$DTXB=0	Disable Lease Line Backup Dial Line.
$DTXB=n	Enable Lease Line Backup Dial Line (n=1~255 min.
	default: 10)
$DTXB?	Display current status.

Page: 23

Image 24

Contents PCM-3601 Copyright notice Unpacking and Installation Feature Fdsp Full -duplex speakerphoneChapter Data modem throughput up to 115.2K bpsError Correction & Data Compression Voice/audio modeNvram directory and stored profiles PackageUnpacking the Modem Look at the Modem CardPC/104 FaxModem Card Setting the COM Port and Interrupt of the Modem Card Installing the Modem CardSerial Port and Interrupt of the Modem Card Testing the Telephone Line Prior to Connection Communications Software ConfigurationSoftware Configuration Tips AT&P0DP Getting StartedModem Fundamentals Modem BasicsData Format Communications Protocol Speeds of the ModemOn-Line Speed DCE Speed Serial Port Speed DTE SpeedError-Correction and Data Compression Ecdc Flow Control Non-Volatile Memory NvramFactory Default Profile FDP Stored Configuration Profile SCPMajor Stored Configuration Profile Major SCP Active Configuration Area ACAStored Telephone Numbers STN Command State and Data State Modem Operation and Response CodesEscape Sequence +++ Issuing Commands Command BufferDeleting Commands Modem AT Response Codes AT Commands Prefix, Repeat and Escape CommandsDial Commands and Dial Modifiers Operation CommandsW1 Enable V.42 response codes, display DCE speed M0 Set modem for async operation P0 M/B ratio 39/61USA Call Back Security Command Set Option Lease Line/Dial Line command set OptionLease Line Backup Dial Line command set Option Display Dialing Number if AT&In Command supportOption Auto Dial/Redial mode Option42bis and MNP Command Set Break ControlEcdc Operation Mode Selection MNP Response Code OptionData Compression Automatic RetrainAppendix a Modem RegisterRegister Summary 1711h XON Character S33 255 Appendix B Result Codes+FCERROR Short Form Long Form Fax Command Codes Fax Class Fax Class II CommandsAppendix C +FDIS Installation of Modem Driver in Win 95/98 Appendix D