| Table |
|
|
|
|
|
|
Number | Terminal Message | Description | Severity |
|
|
|
|
1 | FPGA DOWNLOAD | Failure to download programming to the | Major |
| FAILED |
| |
|
|
|
|
2 | SELF TEST ERROR | A problem has been detected during the | Major |
|
| device |
|
|
|
|
|
3 | DSP1 NOT | No response from the | Major |
| RESPONDING | signal processor 1 |
|
|
|
|
|
4 | DSP2 NOT | No response from the | Major |
| RESPONDING | signal processor 2 |
|
|
|
|
|
5 | DCD FAILED | Data Carrier Detect failure indicating | Major |
|
| that |
|
|
| signal from the other unit |
|
|
|
|
|
6 | SYNC LOSS LINE A | Loss of synchronization on the | Major |
|
| line A |
|
|
|
|
|
7 | SYNC LOSS LINE B | Loss of synchronization on the | Major |
|
| line B |
|
|
|
|
|
8 | NO INTERFACE | No DTE interface is connected | Minor |
|
|
|
|
9 | LAN NOT | The Ethernet interface module is not | Minor |
| CONNECTED | connected to the LAN |
|
|
|
|
|
Main Menu
↓2
Display
↓4
VDSL Performance
5.2 Displaying the VDSL Performance Diagnostics
To display the VDSL diagnostics:
1.From the Main menu, type 2. The Display menu appears.
2.From the Display menu, type 4.
The VDSL Performance screen appears (see Figure
3.Type C to reset the performance registers, type R to monitor the VDSL performance, type S to stop monitoring or press <Esc> to exit.
Displaying the VDSL Performance Diagnostics |