CONNECTION USING S-VIDEO CABLE:
Follow the instructions below to connect an
(CABLES NOT INCLUDED.)
| 1. | Connect the cable, satellite or incoming |
|
| antenna to the ANT jack on the rear of |
| 2. | the VCR. |
| Connect the left and right audio cable from | |
|
| the VCR’s AUDIO OUT jacks to the TV’s |
| 3. | left and right AUDIO IN jacks. |
| Connect the VCR’s | |
| 4. | the TV’s |
| Press the SOURCE button until | |
Jack panel is shown |
| appears on the TV screen and press PLAY |
| on the VCR to watch a tape. | |
on its side. Top of | NOTE: Side panel is accessible by pressing in | |
panel is this side. | ||
| on the tabs, then lift the side cover off. After | |
| connections have been made, slide the wires | |
| through the bottom opening of the cover and | |
| replace cover. |
DVD CONNECTIONS
CONNECTION USING AUDIO/VIDEO CABLES:
Follow the instructions below to connect a DVD player to your television using Audio/Video cables.
(CABLES NOT INCLUDED.)
1. Connect the left and right audio cable from the DVD’s AUDIO OUT jacks to the TV’s left and right AUDIO IN jacks. Connect the DVD’s VIDEO OUT jack to the TV’s VIDEO IN jack.
2. Press the SOURCE button until AV appears on the TV screen and press PLAY on the DVD to watch a DVD.
NOTE: Side panel is accessible by pressing in on the tabs, then lift the side cover off. After connections have been made, slide the wires through the bottom opening of the cover and replace cover.
11