Memorex MLT1912 manual AC Plug, Front

To operate the unit using AC power, connect the AC adapter (included) to the DC 12V IN

jack ( ) on the rear of the unit. Connect the AC cord to the adapter and connect the other zend to a wall outlet having 120V AC, 60Hz only.

NOTES:

• When you turn on the unit, the AC adapter will become warm or hot. This is normal and it is suggested to put the AC adapter in a cool place.

• The AC plug supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut the wide blade. It is the user’s responsibility to have an electrician replace the obsolete outlet.

AC Outlet

AC Plug

FRONT 12 1 2 3 4 5 6 7

1.	8	9
	STANDBY Button–Press to turn the TV on; the
	STANDBY indicator will turn off. Press again to turn
	the TV off (Standby mode); the STANDBY indicator
2.	will light red.
	SOURCE Button–Press to select a source (AV, S-
3.	VIDEO, YUV, PC, ATSC or TV [NTSC]).
	MENU Button–Press to access the on-screen
4.	menu.
	CHANNEL/NAVIGATION Down Button–Press to
	select a lower-numbered channel or navigate down
5.	in the setting menu.	Up Button–Press to
	CHANNEL/NAVIGATION
	select a higher-numbered channel or navigate up in
	the setting menu	5

1011

6.VOLUME Down/Navigation Left Button–Press to lower the volume or navigate left in the setting menu.

7.VOLUME UP/Navigation Right Button–Press to raise the volume or navigate right in the setting menu.

8.Screen

9.Base Stand

10.STANDBY Indicator–Lights red when the unit is Standby mode and is not lit when the unit is on.

11.REMOTE SENSOR

12.Carrying Handle (Rear of Unit)