•iDRAC6 Enterprise card
•iDRAC6 Express card
•Power supply
•Fans
•Processor and heat sink
•Memory modules
4Let the system dry thoroughly for at least 24 hours.
5Reinstall the components you removed in step 3.
6Close the system. See "Closing the System" on page 51.
If the system does not start properly, see "Getting Help" on page 119.
7If the system starts properly, shut down the system and reinstall the expansion card that you removed. See "Installing an Expansion Card" on page 62.
8Run the appropriate online diagnostic test. See "Running the System Diagnostics" on page 111.
If the tests fail, see "Getting Help" on page 119.
Troubleshooting a Damaged System
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1Open the system. See "Opening the System" on page 50.
2Ensure that the following components are properly installed:
•Expansion card and
•Power supply
•Fans
•Processor and heat sink
•Memory modules
Troubleshooting Your System