Dell R210 II owner manual There is no device connected Information only

Message Causes Corrective Actions

PCIe Training Error: Expected Link Width is x, Actual Link Width is y.

Faulty or improperly installed PCIe card in the specified slot.

Reseat the PCIe card in the specified slot number. See "Troubleshooting an Expansion Card" on

page 109. If the problem persists, see "Getting Help" on page 119.

SATA Portx	There is no device connected	Information only.
device not	to the specified SATA port.
found.
SATA port x	The drive connected to the	Replace the faulty drive.
device auto-	specified SATA port is faulty.
sensing error.
SATA port x
device
configuration
error.
SATA port x
device error.
The amount of	Memory has been added or	If memory has been added or
system memory	removed or a memory	removed, this message is
has changed.	module may be faulty.	informative and can be
		ignored. If memory has not
		been added or removed,
		check the SEL to determine
		if single-bit or multi-bit
		errors were detected and
		replace the faulty memory
		module. See
		"Troubleshooting System
		Memory" on page 104.
Time-of-day not	Incorrect Time or Date	Check the Time and Date
set - please run	settings; faulty system	settings. See "Using the
SETUP program.	battery.	System Setup Program and
		Boot Manager" on page 25. If
		the problem persists, replace
		the system battery. See
		"System Battery" on page 89.

About Your System

21