Removing a Filler Panel
1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2Open the system. See "Opening the System" on page 50.
3If installed, remove the front bezel. See "Removing the Front Bezel" on page 49.
4Pull the filler panel away from the chassis.
Figure 3-5. Removing and Installing a Filler Panel
1
1 filler panel
Installing a Filler Panel
1Slide the filler panel into the bay until it clicks into place. See Figure
2Replace the front bezel. See "Installing the Front Bezel" on page 49.
3Close the system. See "Closing the System" on page 51.
Installing System Components
55