Packard Bell A7 manual Removing the Keyboard, Releasing the keyboard cover

Page 13

Removing the Keyboard

To remove the Keyboard, first remove the battery (see Removing the Battery), then perform the following steps:

1. Release two screws on keyboard cover as shown in Fig. 13

Fig. 13 Releasing the keyboard cover

2. Lift up the keyboard cover carefully as shown in Fig. 14

Fig. 14 Lifting up the Keyboard Cover

M2x4.5 Black

NEC Versa S940/PB EasyNote A7 Disassembly Manual

Page 13

Image 13

Contents Versa S940 Disassembly Manual Table of contents Reassembly Instructions Disassembly InstructionsOverview Technician NotesHazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Removing the battery Removing the BatteryRemoving the screws retaining the memory module slot cover Removing the Memory ModuleWlan Card Module Removing the Wlan Card ModuleRemoving the Hard disk drive cover Removing the Hard Disk DriveRemove four screws that around HDD module Eject the optical drive Removing the Optical Disk DriveRemoving the screws retaining CPU cover Removing the CPUUnlocking the CPU Releasing the keyboard cover Removing the KeyboardUnscrew two screws at the bottom as shown in Fig Removing the LCD Module Disconnecting the keyboard flat cableCarefully lift up the LCD Module Removing the rubber covers & screws on the LCD Module Removing the LCD PanelDisconnect all connectors on inverter board as shown in Fig Bottom Cover Removing the Top CoverCarefully lift up the Top Cover Main board Removing the Main BoardDisconnect Audio board from main board as shown in Fig Removing the Touch Pad Removing the Speaker AssemblyScrews DIP Switch SettingsVersa S940/EasyNote A7 Disassembly Manual