Removing the Top Cover
To remove the Top Cover , first remove the battery (see Removing the Battery), remove the HDD (see Removing the Hard Disk Drive), remove the Optical Disk Drive (see Removing the Optical Disk Drive), remove the CPU (see Removing the CPU)remove the Keyboard (see Removing the Keyboard) and remove the LCD Module (see Removing the LCD Module) then perform the following steps:
1. Remove all screws on the bottom of the base unit as shown in Fig. 25
Fig. 25 Bottom Cover
2.Release two screws at the rear of system as shown in Fig. 26
Fig. 26 Rear view
A = M2.5x5 Black
B = M2.5x2.5
Silver
C= M2.5x6
Copper
D = M2.5x6 Silver
E = M2.5x8
Copper
M2.5x5 Black
NEC Versa S940/PB EasyNote A7 Disassembly Manual | Page 19 |