Packard Bell A7 manual Disconnect all connectors on inverter board as shown in Fig

Page 18

4. Release four screws at the both side of LCD hinge as shown in Fig. 22

Fig. 22 Unscrew LCD Penal

5. Disconnect all connectors on inverter board as shown in Fig. 23

Fig. 23 Removing the Inverter Board

6.Carefully lift up the LCD panel.

7.Remove the screws at both sides of the LCD panel in order to release the LCD hinges as shown in Fig. 24

Fig. 24 Removing the LCD Panel hinges

M2.5x4 Copper

M2x4 Silver

NEC Versa S940/PB EasyNote A7 Disassembly Manual

Page 18

Image 18

Contents Versa S940 Disassembly Manual Table of contents Overview Disassembly InstructionsReassembly Instructions Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Removing the Battery Removing the batteryRemoving the Memory Module Removing the screws retaining the memory module slot coverRemoving the Wlan Card Module Wlan Card ModuleRemoving the Hard Disk Drive Removing the Hard disk drive coverRemove four screws that around HDD module Removing the Optical Disk Drive Eject the optical driveRemoving the CPU Removing the screws retaining CPU coverUnlocking the CPU Removing the Keyboard Releasing the keyboard coverUnscrew two screws at the bottom as shown in Fig Disconnecting the keyboard flat cable Removing the LCD ModuleCarefully lift up the LCD Module Removing the LCD Panel Removing the rubber covers & screws on the LCD ModuleDisconnect all connectors on inverter board as shown in Fig Removing the Top Cover Bottom CoverCarefully lift up the Top Cover Removing the Main Board Main boardDisconnect Audio board from main board as shown in Fig Removing the Speaker Assembly Removing the Touch PadDIP Switch Settings ScrewsVersa S940/EasyNote A7 Disassembly Manual