Removing the LCD Panel
To remove the LCD panel, first remove the LCD module (see Removing the LCD Module), then perform the following steps:
1.Use a pin to remove the rubber cover on the LCD module as shown in Fig. 20
2.Remove all screws as shown in Fig. 20 and remove carefully the LCD cover.
Fig. 20 Removing the rubber covers & screws on the LCD Module
3. Carefully removing the LCD Bezel as shown in Fig. 21
A = M2x7 Silver
B = M2.5x5 Black
Fig. 21 Removing the LCD Bezel
NEC Versa S940/PB EasyNote A7 Disassembly Manual | Page 17 |