Packard Bell A7 manual Carefully lift up the Top Cover

Page 20

3. Disconnect the Touch Pad Connector and remove all screws as shown in Fig. 27

Fig. 27 Top cover

4. Carefully lift up the Top Cover.

A = M2.5x4 Silver

B = M2.5x5 Silver

NEC Versa S940/PB EasyNote A7 Disassembly Manual

Page 20

Image 20

Contents Versa S940 Disassembly Manual Table of contents Disassembly Instructions Reassembly InstructionsOverview Technician NotesAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage Removing the Battery Removing the batteryRemoving the Memory Module Removing the screws retaining the memory module slot coverRemoving the Wlan Card Module Wlan Card ModuleRemoving the Hard Disk Drive Removing the Hard disk drive coverRemove four screws that around HDD module Removing the Optical Disk Drive Eject the optical driveRemoving the CPU Removing the screws retaining CPU coverUnlocking the CPU Removing the Keyboard Releasing the keyboard coverUnscrew two screws at the bottom as shown in Fig Disconnecting the keyboard flat cable Removing the LCD ModuleCarefully lift up the LCD Module Removing the LCD Panel Removing the rubber covers & screws on the LCD ModuleDisconnect all connectors on inverter board as shown in Fig Removing the Top Cover Bottom CoverCarefully lift up the Top Cover Removing the Main Board Main boardDisconnect Audio board from main board as shown in Fig Removing the Speaker Assembly Removing the Touch PadDIP Switch Settings ScrewsVersa S940/EasyNote A7 Disassembly Manual