Packard Bell A7 manual DIP Switch Settings, Screws

Page 24

DIP Switch Settings

No DIP switch available on ED1 platform.

Screws

M2.5x2.5 Silver

M2.5x4 Silver

M2.5x8 Copper

M2.5x5 Silver	M2.5x6 Silver	M2.5x6 Copper

M2x3 Silver	M2x4 Silver	M2.5x4 Copper

M2x4.5 Black	M4x3 Silver

M2.5x5 Black

M2x7 Silver

M2.5x3 Silver

NEC Versa S940/PB EasyNote A7 Disassembly Manual

Page 24

Image 24

Contents Versa S940 Disassembly Manual Table of contents Disassembly Instructions Reassembly InstructionsOverview Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Removing the Battery Removing the batteryRemoving the Memory Module Removing the screws retaining the memory module slot coverRemoving the Wlan Card Module Wlan Card ModuleRemoving the Hard Disk Drive Removing the Hard disk drive coverRemove four screws that around HDD module Removing the Optical Disk Drive Eject the optical driveRemoving the CPU Removing the screws retaining CPU coverUnlocking the CPU Removing the Keyboard Releasing the keyboard coverUnscrew two screws at the bottom as shown in Fig Disconnecting the keyboard flat cable Removing the LCD ModuleCarefully lift up the LCD Module Removing the LCD Panel Removing the rubber covers & screws on the LCD ModuleDisconnect all connectors on inverter board as shown in Fig Removing the Top Cover Bottom CoverCarefully lift up the Top Cover Removing the Main Board Main boardDisconnect Audio board from main board as shown in Fig Removing the Speaker Assembly Removing the Touch PadDIP Switch Settings ScrewsVersa S940/EasyNote A7 Disassembly Manual