Promise Technology 150TX2 user manual New Windows ME Installation

Page 48

FastTrak S150 TX2plus User Manual

New Windows ME Installation

The following details the installation of the FastTrak TX2plus drivers while installing Windows ME.

1.Install the FastTrak TX2plus controller card into your system.

2.Install Windows ME fully.

3.After installation, go to the Start menu and choose Settings.

4.From the Settings menu, choose Control Panel.

5.In the Control Panel window, double-click the System icon.

6.In the System window, choose the Device Manager tab.

7.In the hierarchical display under Other Devices is a listing for PCI RAID Controller. Click it then click the Properties button.

8.In the Properties window, choose the Driver tab then choose Update Driver and click Next.

9.Choose Search for a better driver than the one your device is using now (recommended) then click Next.

10.Choose Specify Location then type A:\WIN98-MEin the text box.

11.Insert the FastTrak TX2plus driver diskette into the A: drive.

12.Click the Next button. A message informing you that “Win98-ME Promise FastTrak TX4000/S150 TX Series Controller” should appear.

13.Click Next, then click Finish.

14.When asked if you want to restart your computer, click Yes. Immediately remove the diskette from drive A:.

44

Image 48
Contents Fasttrak S150 TX2PLUS Copyright TrademarksImportant Data Protection Information Contents Page Introduction FastTrak S150 TX2plusPromise Array Management Utility PAM Key Features and Benefits Features BenefitsCompatibility Installation Unpacking Your FastTrak CardInstalling the FastTrak Card Insert the FastTrak card into an open PCI slotInstalling the Hard Drives FastTrak S150 TX2plus card Creating Your Disk Array Creating a Performance Array Creating a Security Array with New Drives Page Creating a Security Array with an Existing Data Drive Seagate S380023AS Installation Creating a Security Array with Quick Initialization Installation Page Using FastBuild Configuration Utility Viewing FastTrak S150 TX2plus Bios ScreenNavigating the FastBuild Setup Menu Using the Main MenuCreating Arrays Automatically Optimize Array forPerformance Security Security and PerformanceUsing a Hot Spare Drive Viewing Drive Assignments Creating Multiple ArraysManually Creating an Array Selecting Array Type Selecting Stripe BlockGigabyte Boundary Assigning Drives to Array Creating a Striped ArrayCreating a Mirrored Array Using New Drives Adding Fault Tolerance to an Existing Drive Drive Model Capacity MB Page Creating a Hot Spare Drive for Mirrored Arrays How FastTrak S150 TX2plus Orders ArraysHow FastTrak S150 TX2plus Saves Array Information Deleting an Array Array Stripe 160048 Rebuilding a Mirrored Array 80024 Page Installing Software Drivers Procedure NumberWindows XP Installation Existing Windows XP Installation Confirming Windows XP Driver InstallationNew Windows 2000 Installation Existing Windows 2000 Installation Confirming Windows 2000 Driver InstallationNew Windows ME Installation Existing Windows ME Installation Confirming Windows ME Driver InstallationNew Windows NT4.0 Installation Existing Windows NT4.0 Installation Removing Driver from Windows NT4.0New Windows 98 Installation Existing Windows 98 Installation Confirming Windows 98 Driver InstallationPage About Adapter Bios FastBuild Auto Menu SetupAbout FastTrak S150 TX2plus Reserve SectorRAID Level Performance Fault Capacity No. Tolerance Drives Disk Array TermsDisk Array Description Disk Array MemberAbout RAID Levels Striping RAIDMirroring RAID Data Mirror Disk DrivesDisk Array Concepts Striping / Mirroring RAID 0+1 Motherboard Issues Configuring PCI IRQ resourcesIntermittent data problems Freeing additional IRQ resourcesSystem Cmos Issues Using an Onboard IDE Card with FastTrak S150 TX2plusDrive-Related Errors Critical Array Status Error Reported during BootDrive cannot be formed into an array System Cmos displays C or D drive failure during StartupUnable to Partition or Format Array Cannot Rebuild Mirrored RAID 1 Array Operating System-Related Issues Promise Windows driver does not appear in Device ManagerTroubleshooting & Tips Performance Tips Optimize Array for PerformanceChange Setting of PCI Bus Utilization Page Appendix a Frequently Asked Questions Pre-InstallationRAID 0 Stripe RAID 1 MirrorRAID 0+1 Stripe + Mirror Drive Issues Page Installation Issues Post-InstallationPage Technical Support Services USA Tech Support CenterEuropean Tech Support Pacific Rim Sales Office China OfficeLimited Warranty Disclaimer of other warrantiesYour Responsibilities Returning Product for Repair