Promise Technology 150TX2 user manual Returning Product for Repair

Page 81

Appendix B: Technical Support

Returning Product for Repair

If you suspect a product is not working properly, or if you have any questions about your product, contact our Technical Support Staff through one of our Technical Services, making sure to provide the following information:

Product model and serial number (required);

Return shipping address;

Daytime phone number;

Description of the problem;

Copy of the original purchase invoice.

The technician will assist you in determining whether the product requires repair. If the product needs repair, the Technical Support Department will issue an RMA (Return Merchandise Authorization) number.

Return only the specific product covered by the warranty (do not ship cables, manuals, diskettes, etc.), with a copy of your proof of purchase to:

USA and

Promise Technology, Inc.

Canada:

Customer Service Dept.

 

Attn.: RMA # ______

 

1745 McCandless Drive

 

Milpitas, CA 95035

Other Countries:

Return the product to your dealer or

 

retailer.

 

Contact them for instructions before

 

shipping the product.

You must follow the packaging guidelines for returning products:

Use the original shipping carton and packaging or similar packaging if the original is not available:

Include a summary of the product’s problem(s)

Write an attention line on the box with the RMA number

Include a copy of proof of purchase

You are responsible for the cost of insurance and shipment of the product to Promise. Note that damage incurred due to improper transport or packaging is not covered under the Limited Warranty.

When repairing returned product(s), Promise may replace defective parts with new or reconditioned parts, or replace the entire unit with a new or reconditioned unit. In the event of a replacement, the replacement unit will be under warranty for the remainder of the original warranty term from purchase date, or 30 days, whichever is longer.

Promise will pay for standard return shipping charges only. You will be required to pay for any additional shipping options (such as express shipping).

77

Image 81
Contents Fasttrak S150 TX2PLUS Copyright TrademarksImportant Data Protection Information Contents Page FastTrak S150 TX2plus IntroductionPromise Array Management Utility PAM Features Benefits Key Features and BenefitsCompatibility Unpacking Your FastTrak Card InstallationInsert the FastTrak card into an open PCI slot Installing the FastTrak CardInstalling the Hard Drives FastTrak S150 TX2plus card Creating Your Disk Array Creating a Performance Array Creating a Security Array with New Drives Page Creating a Security Array with an Existing Data Drive Seagate S380023AS Installation Creating a Security Array with Quick Initialization Installation Page Viewing FastTrak S150 TX2plus Bios Screen Using FastBuild Configuration UtilityUsing the Main Menu Navigating the FastBuild Setup MenuCreating Arrays Automatically Optimize Array forPerformance Security and Performance SecurityUsing a Hot Spare Drive Creating Multiple Arrays Viewing Drive AssignmentsManually Creating an Array Selecting Stripe Block Selecting Array TypeGigabyte Boundary Creating a Striped Array Assigning Drives to ArrayCreating a Mirrored Array Using New Drives Adding Fault Tolerance to an Existing Drive Drive Model Capacity MB Page Creating a Hot Spare Drive for Mirrored Arrays How FastTrak S150 TX2plus Orders ArraysHow FastTrak S150 TX2plus Saves Array Information Deleting an Array Array Stripe 160048 Rebuilding a Mirrored Array 80024 Page Procedure Number Installing Software DriversWindows XP Installation Confirming Windows XP Driver Installation Existing Windows XP InstallationNew Windows 2000 Installation Confirming Windows 2000 Driver Installation Existing Windows 2000 InstallationNew Windows ME Installation Confirming Windows ME Driver Installation Existing Windows ME InstallationNew Windows NT4.0 Installation Removing Driver from Windows NT4.0 Existing Windows NT4.0 InstallationNew Windows 98 Installation Confirming Windows 98 Driver Installation Existing Windows 98 InstallationPage FastBuild Auto Menu Setup About Adapter BiosAbout FastTrak S150 TX2plus Reserve SectorDisk Array Terms RAID Level Performance Fault Capacity No. Tolerance DrivesDisk Array Description Disk Array MemberStriping RAID About RAID LevelsData Mirror Disk Drives Mirroring RAIDDisk Array Concepts Striping / Mirroring RAID 0+1 Configuring PCI IRQ resources Motherboard IssuesIntermittent data problems Freeing additional IRQ resourcesUsing an Onboard IDE Card with FastTrak S150 TX2plus System Cmos IssuesCritical Array Status Error Reported during Boot Drive-Related ErrorsDrive cannot be formed into an array System Cmos displays C or D drive failure during StartupUnable to Partition or Format Array Cannot Rebuild Mirrored RAID 1 Array Promise Windows driver does not appear in Device Manager Operating System-Related IssuesTroubleshooting & Tips Optimize Array for Performance Performance TipsChange Setting of PCI Bus Utilization Page Pre-Installation Appendix a Frequently Asked QuestionsRAID 0 Stripe RAID 1 MirrorRAID 0+1 Stripe + Mirror Drive Issues Page Post-Installation Installation IssuesPage Technical Support Services USA Tech Support CenterEuropean Tech Support China Office Pacific Rim Sales OfficeDisclaimer of other warranties Limited WarrantyYour Responsibilities Returning Product for Repair