FieldServer FS-8704-49 instruction manual Client Side Node Descriptors

FS-8700-49_Data_Aire_DAP Page 9 of 48

4.3.Client Side Node Descriptors

	Section Title
	Nodes
	Column Title		Function	Legal Values
	Node_Name	Provide name for node		Up to 32 alphanumeric characters
	Node_ID		Modbus station address of	1-259
			physical server node
	Protocol		Specify protocol used	DAP
	Connection		Specify which port the device is	P1-P8, R1-R23
			connected to the FieldServer
Example

//Client Side Nodes

Nodes
Node_Name	Node_ID	Protocol	Connection
Unit1,	1,	DAP,	R1

This is the connection to the primary port identified with the 'Port' keyword in the connection configuration described in Section 4.2

4.4.Client Side Map Descriptors

4.4.1.FieldServer Related Map Descriptor Parameters

Column Title	Function	Legal Values
Map_Descriptor_Name	Name of this Map	Up to 32 alphanumeric
	Descriptor	characters
	Name of Data Array	One of the Data Array
	where data is to be
Data_Array_Name		names from “Data Array”
	stored in the
		section above
	FieldServer
Data_Array_Offset	Starting location in Data	0 to maximum specified in
	Array	“Data Array” section above
Function	Function of Client Map	RDBC, WRBC, WRBX
	Descriptor

3Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com Tel: (408) 262-2299 Fax: (408) 262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com