Important Safety Notes (continued)
DA900 AddressRight™ Printer 1
• | Use the power cord wall plug as the primary means of |
|
| disconnecting the machine from the AC power. The | Introduction |
| wall outlet should be near the machine and easily | |
|
| |
| accessible. |
|
• | DO NOT route the power cord over sharp edges or |
|
| trap it between pieces of furniture. |
|
• | Insure that there is no strain on the power cord where |
|
| it passes between the equipment, walls or furniture. | 1- |
• | Be certain the area in front of the wall receptacle into | |
| which the machine is plugged is free from obstruction. |
|
• | Do not remove the covers; they enclose hazardous |
|
| parts. If the machine has been dropped or has |
|
| otherwise had the covers stressed in any way, report it |
|
| to Pitney Bowes Service. Keep fingers, loose clothing, |
|
| jewelry, ties and long hair away from moving parts. |
|
• | To reduce the risk of fire or electrical shock, DO NOT |
|
| attempt to disassemble this machine. If service is |
|
| required, contact Pitney Bowes customer service. |
|
• Use only Pitney Bowes approved and supplied ink |
| |
| cartridges and cleaners. |
|
• | Avoid touching moving parts or materials while the |
|
| machine is in use. Before clearing a jam, be sure |
|
| machine mechanisms come to a complete stop. |
|
• | Use the equipment only for its intended purpose. |
|
• | Always follow the specific occupational safety and |
|
| health standards prescribed for your workplace. |
|
• | Turn off the machine and unplug power cords at the |
|
| end of the working day to reduce the risk of injury. |
|