6.Adjust the Upper Exit Rollers
DA900 AddressRight™ Printer 5
The upper exit rollers will move when you move printheads one and six. You may need to adjust them so that they do not touch any printed area of the exiting material.
Note that when you adjust the rollers, you are also moving printheads 1 and 6 because they are attached.
To adjust the upper exit rollers:
1.Loosen the locking knob on the printhead holder assem- bly.
2.Slide printheads 1 and 6 to where you want them.
3.Tighten the locking knob.
Knobs PrinterAdjust