Pitney Bowes DA900 manual Maintenance, General Cleaning Replacing the Inkjet Cartridge

7 Maintenance

General

Cleaning

Replacing the Inkjet Cartridge

Your printer is designed to provide trouble-free service with a minimal amount of care. To keep it in top condition, you should schedule regular cleaning of the feed rollers, exit rollers and lower guide.

•Clean the printhead cartridge and cover with a lint-free cloth and distilled water only. Order cleaning kit, supply #902-1. See Chapter 8 for ordering instructions.

•Never spray or pour water directly on or into the printer; excess liquid could harm electronic parts. Always dampen a rag and apply it to the parts to be cleaned.

•Clean all rubber rollers and transport belts with water or alcohol.

•Keep petroleum-based cleaning solvents away from rubber or plastic parts.

NOTE: Use of any other cleaning solvents will void all warranties.

Follow the steps below to replace the inkjet cartridge.

1.Lift up the blue retaining lever located above the cartridge holder.

2.Remove the cartridge by pulling the top toward you and lift the cartridge up and out of the holder.

3.Remove a new print cartridge from its packaging. Take care not to touch the copper contacts or printhead nozzles. Remove protective tape from the printhead.

7-2 SV60970-OG Rev. A