JAI TM-1400 operation manual SerToFG Differential Serial Communication to frame grabber

Page 8

Installation

2.2.2 (d) Camera Link Connector

The TM-1400CL has a 26-pin MDR26 connector (3M part number 10226-6212VC) on the rear panel to output Camera Link data. The connector pin-out is shown in Table 4 below.

13 1

	26	14
TABLE 4.	Connector Pinout Configurations (10226-6212 VC)

Camera Link Connector MDR 26-pin Connector 10226-6212VC

Pin #	Description	I/O	Pin #	Description	I/O
1	GND		14	GND	(Shield)
2	Tx OUT 0-	Out	15	Tx OUT 0+	Out
3	Tx OUT 1-	Out	16	Tx OUT 1+	Out
4	Tx OUT 2-	Out	17	Tx OUT 2+	Out
5	Tx CLK OUT-	Out	18	Tx CLK OUT+	Out
6	Tx OUT 3-	Out	19	Tx OUT 3+	Out
7	SerTC+	In	20	SerTC-	In
8	SerTFG-	Out	21	SerTFG+	Out
9	VINIT- (CC1-)	In	22	VINIT+ (CC1+)	In
10	INTEG+ (CC2+)	In	23	INTEG- (CC2-)	In
11	EX_HD-	In	24	EX_HD+	In
12	EX_HD+	In	25	EX_HD-	In
13	GND		26	GND

Note: SerTC: Differential Serial Communication to camera;

SerToFG: Differential Serial Communication to frame grabber.

2.2.2 (e) Analog Output Connector

The TM-1400 has a BNC connector on the rear panel to output analog video.

TM-1400 Series Progressive Scan Shutter Cameras