HotBrick VPN 800/2 manual IP Global Setting Global Parameters, Log Level

	HotBrick Network Solutions
IP Global Setting
Global Parameters	Enable –If you enable check box either WAN1,WAN2 or both, this will
	start VPN global setting
	ISAkmp Port– Internet Security Association and Key Protocol
	Management (ISAkmp) is designed to negotiate, establish, modify and
	delete security associations and their attributes. In particular, it was
	assigned UDP port 500 by the IANA.
	Phase 1 DH Group – Use DH Group 1(768-bits),DH Group 2(1024-
	bits), Group 5 (1536-bits) to generate IPSec SA keys.
	Phase 1 Encryption Method– There are three data encryption
	methods available,DES, 3DES,and AES.
	Phase 1 Authentication Method– There are two authentication
	available. MD5 and SHA1 (Secure Hash Algorithm)
	Phase 1 SA Life Time– By default the Security Association lifetime is
	28800 Sec.
	Maxtime to complete phase 1 – The aim of phase 1 is to authenticate
	and establish a secure tunnel, which will protect further IKE negotiation.
	The maximum time default is 30 sec.
	Maxtime to complete phase 2 – Really establish the IPSec SAs. By
	default the maximum time is 30 sec.
	Count Per Send – Number of duplicated packets for resend.
	Force Deletion after Expiry – Once SA get expired, tunnel will be
	removed and related resources will be released to the system.
Log Level	It is a VPN Log Level. Select a VPN log level that you like to display on
	VPN log.

Page 52