HotBrick Network Solutions
Access Filter
The network Administrator can use the Access Filter to gain fine control over the Internet access and applications available to LAN users.
•Five (5) user groups are available, and each group can have different access rights.
•All PCs (users) are in the Default group, unless assigned to another group on the Host IP screen.
Figure 5-2: Access Filter
Settings – Block URL
Setup Access Group
Select Group - This allows you have different access rights for different Groups of PCs.
•If you want the same restrictions to apply to everyone, select Default for the Group. In this case, there is no need to enter any Hosts on the Host IP screen.
•If you wish to apply different restrictions on different Groups, select the desired Group, and click the "Select" button. The screen will update with data for the selected Group.
Page 46