| HotBrick Network Solutions |
Data – System Status | |
|
|
WAN | • Connection Status – Current status – either "Connected" or "Not connected". |
Information | • Connection Type – The type of connection used – DHCP, Fixed IP, PPPoE, |
| |
| or PPTP. |
| • "Force Renew" button– Only available if using a dynamic IP address |
| (DHCP). Clicking this button will perform a DHCP "Renew" transaction with |
| the ISP's DHCP server. This will extend the period for which the current WAN |
| IP address is allocated to you. |
| • IP Address – The IP address of the VPN 800/2 Firewall Router, as seen from |
| the Internet. This IP Address is allocated by the ISP (Internet Service |
| Provider) |
| • Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above. |
| • Domain Name IP Address – The address of the current DNS (Domain Name |
| Server. |
| • MAC Address – The MAC (physical) address of the VPN 800/2 Firewall |
| Router, as seen from the Internet. |
LAN | • IP Address – The LAN IP Address of the VPN 800/2 Firewall Router. |
Information | • Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above. |
| |
| • MAC Address – The MAC (physical) address of the VPN 800/2 Firewall |
| Router, as seen from the local LAN. |
| • DHCP Server – The status of the DHCP Server function - either "Enabled" or |
| "Disabled". |
Device | • Firmware Version – Version of the Firmware currently installed. |
Information | • NAT – Status of the NAT feature – either “Enable” or “Disable”. |
| |
| • Load Balance – Status of the Load Balance feature – either “Enable” or |
| “Disable”. |
| • Virtual Server – Status of the Virtual Server feature – either "Enabled" or |
| "Disabled". |
| • Special Applications – Status of the Special Applications feature – either |
| "Enabled" or "Disabled". |
| • DMZ – Status of the DMZ feature – either "Enabled" or "Disabled". |
| • Block URL – Status of the Block URL feature – either “Enable” or “Disable”. |
| • Hardware ID – The manufacturers ID for this particular device. |
|
|
Device | • System UpTime – The time since the system of a device was last |
Statistics | reinitialized. |
| • CPU Usage – The current usage percentage of CPU. |
| • Memory Usage – The current usage percentage of Memory (Heap & Queue). |
|
|
Page 72