HotBrick Network Solutions
7.Enter admin for the "User Name" and leave the "Password" blank.
•The "User Name" is always admin
•You can and should set a password, using the following Admin Password screen.
No Response?
•Is your PC using a Fixed IP address?
If so, you must configure your PC to use an IP address within the range 192.168.1.2 to 192.168.1.254, with a Network Mask of 255.255.255.0. See Appendix B – Windows TCP/IP Setup for details.
•Check that the VPN 800/2 Firewall Router is properly installed, LAN connection is OK, and it is powered ON.
8.After the login, you will then see the Admin Password screen, as shown below. Assign a password by entering it in the "Password" and "Verify Fields.
Figure 2-2: Home Screen (Admin Password) VPN 800 /2
Page 9