HotBrick VPN 800/2 manual Settings Advanced Pptp

HotBrick Network Solutions

Advanced PPTP

This screen is only useful if using the PPTP connection method.

	Figure 3-4: Advanced PPTP
Settings – Advanced PPTP
Select WAN Port	Select the desired Port, and then click the "Select" button. The data for the
	selected Port will then be displayed in the WAN IP Account section.
	PPTP MTU – Maximum transfer unit for PPTP. The default value is 1456.
WAN IP Account	• User Name – The PPTP user name (login name) assigned by your ISP.
	• Password – The PPTP password associated with the User Name above.
	This is assigned by your ISP, and used to login to the PPTP Server.
	• Verify Password – Re-enter the PPTP password assigned by your ISP.
	• Server IP Address – Enter the IP address of the PPTP Server, as
	provided by your ISP.
	• Static IP Address – If you have a fixed IP address, enter if here.
	Otherwise, this field should be left at 0.0.0.0.
Action	Use the "Connect" and "Disconnect" buttons to establish or terminate a
	connection on this session, if required.
Connection	This displays the current connection status.
Status

Page 24