REPRINT
Simply by pressing the REPRINT button, you can print as many copies as you like of the last image printed.
x If the power is cut, the last image is stored.
x Transferring a new image overwrites the stored image. x This function cannot be used with USB communication.
1 Check that the printer is turned on.
Lit
x If the printer is turned off, turn it on.
2 Press the REPRINT button.
Erasing the stored image
When the printer is turned off, hold down the REPRINT button as you turn the printer on. This erases the stored image.
1 Check that the printer is turned off.
Turn off | x If the printer is turned on, turn it off. |
| x When the printer is turned off, all the |
| |
| lamps are off. |
x If there is no image stored in the printer’s memory, the ERROR lamp blinks 3 times. (P.41)
3 Take the film out when film output ends.
Lit (POWER button)
x When the printer is connected to a digital camera (when the PictBridge lamp is lit), you cannot use the reprint function. Disconnect the USB cable and wait until the PictBridge lamp is off before using this function.
x Color tones may change slightly in continuous printing.
1 +
2
BlinkingLit
2 Hold down the REPRINT button as you press the POWER button.
When the POWER button lights and the ERROR lamp blinks once, erasing is completed.
Advanced Printing
36 | 37 |