FujiFilm MP-300 owner manual Error LOW Battery lamp, Troubleshooting, Lit, Blinking

ERROR - LOW BATTERY lamp -

Lit

		The batteries are about to run out.
Lit	Lit	Have new batteries ready. (P.18)
		Case 1. Battery low.
	Lit	Load new batteries. (P.21)

●! When replacing the batteries, turn the printer off beforehand.

●! Do not reload batteries while the printer (motor) is running as this could cause printer malfunctions.

Case 2. You are using the wrong AC power adapter.

Only use the FUJIFILM AC-5VX AC Power

Adapter. (P.14, 19)

Case 3. The AC power adapter may be faulty.

Refer to the owner’s manual of the AC power adapter.

Blinking

The printer may be faulty.

Blinking Complete the enclosed service card and contact

your nearest FUJIFILM authorized distributor.

Troubleshooting

■Troubleshooting printer problems

Problems	Possible Causes	Solutions
The photo pack	1 The photo pack is not	1 Use the “FUJIFILM
won’t load into your	for your printer.	Mobile Printer
printer, or won’t load		Photo Pack” or the
into your printer		“FUJIFILM instax
smoothly.		digital film (pivi)” (No
		other photo pack can
		be used). (P.18)
	2 The photo pack is	2 Align the turquoise
	loaded incorrectly.	mark on the photo
		pack with the locating
		mark (turquoise)
		on the printer when
		loading the pack.
POWER button was	1 The batteries are	1 Load new batteries.
pressed but nothing	dead.	(P.18)
happened.	2 The batteries are	2 Load the batteries
	loaded incorrectly.	correctly. (P.21)
	3 You released the	3 Hold the POWER
	POWER button too	button down until
	soon.	the POWER button
		lights (one second or
		more).
	4 The AC power	4-1 Ensure that the AC
	adapter is not	power adapter is
	connected correctly.	connected to the
		printer correctly.
		4-2 Ensure that the AC
		power adapter is
		plugged into the
		mains power outlet
		correctly.

42 43