If you have a
8.Click OK.
Setting and Changing the DVD-ROM Drive Region Code
If you reinstall the DVD decoder software, you must set the
NOTICE: You should reset the region code only when absolutely necessary. You can reset the region code up to four times.
To reset the drive region code, perform the following steps:
1.Insert a DVD coded for the new region into the
A notification box appears, explaining that the disc belongs to another region and cannot be played. The notification also explains how to reset the region setting.
2.Follow the instructions on the screen to change the region setting.
Install the Intel SpeedStep Utility (Windows 2000) (Optional)
NOTICE: Do not install the Intel SpeedStep utility unless your computer has a Mobile Intel Pentium III processor with SpeedStep technology. To deter- mine if your computer has a Mobile Intel Pentium III processor with SpeedStep technology, check for the Intel SpeedStep item in the Power menu of the system setup program. For instructions on using the system setup program, refer to Appendix B, “Using the System Setup Program,” found later in this guide.
If your computer has a Mobile Intel Pentium III processor with Intel SpeedStep tech- nology, you must reinstall the Intel SpeedStep utility after you install a new
1.Save and close any open files, and exit any open application programs.
2.Insert the System Software CD into the
3.Click the Start button, and then click Run.
4.In the Run dialog box, type x:\win2000\spd_step\english\setup.exe, where x is the
The
5.Click OK.
6.In the Welcome window, click Next>.
support.dell.com | Installing System Software |