Dell D410, PP06S specifications

3.Remove the center control cover:

a. Open the display all the way (180 degrees) so that it lies flat against your work surface.

NOTICE: Removing the center control cover in a different way than described may cause the plastic to break.

b.Starting on the right side of the computer, use a plastic scribe to pry up the center control cover. Lift the cover away from the computer going from the right toward the left, and lay the cover aside.

4.Remove the keyboard:

a. Remove the two M2.5 x 6-mm screws across the top of the keyboard.

NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard.

NOTICE: Lift the keyboard carefully in step b to ensure that you do not pull on the keyboard wire.

b.Rotate the keyboard up 90-degrees and slide it forward to gain access to the keyboard connector.

c.Pull up on the keyboard connector tab to disconnect the keyboard connector from the system board.

NOTICE: When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid scratching the palm rest.

1 M2 x 3-mm screws (2) 057HW

2keyboard

3keyboard tabs (5)

4keyboard connector on system board

5keyboard connector tab