1
2
3
4
5
card door
captive screw on card door
card connector
card
card screw
Coin-Cell Battery
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1.Follow the procedures in "Before You Begin."
2.Turn the computer over, loosen the two captive screws on the memory
NOTICE: To avoid damaging the system board, ensure that you do not remove the plastic film between the battery and the system board as you move the
3.Gently pull the
4.Remove the