Dell PP06S, D410 specifications Back to Contents

1battery-bay latch releases (2) 5 docking-device connector

2	battery charge gauge	6	memory module/coin-cell battery cover
3	battery	7	fan air vents
4	hard drive

battery-bay latch releases — Release the battery. See "Using a Battery" for instructions.

battery charge gauge — Provides information on the battery charge. See "Using a Battery" for instructions.

battery — When a battery is installed, you can use the computer without connecting the computer to an electrical outlet. See "Using a Battery."

NOTE: Using batteries in both the Media Base and the computer while the computer is docked in the Media Base increases the battery operating time.

hard drive — Stores software and data.

memory module/coin-cell battery cover — Covers the compartment that contains the memory module(s) and the coin-cell battery. See "Adding and Replacing Parts."

docking-device connector — Lets you attach your computer to the Media Base or other docking device. See the Dell documentation that came with your docking device for more information.

fan air vents — The computer uses an internal fan to create airflow through the fan air vents, which prevents the computer from overheating.

NOTE: The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fan or the computer.

CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire.

Back to Contents Page