Cobalt Networks 9084 manual S p

Page 30

3	Control and Display Descriptions

Card Edge Display Orientation, Brightness, and Timeout

Adjust

The card edge 4-Character Alphanumeric Display can be changed between vertical or horizontal character orientation to suit the mounting position of the card as shown and described below.

D

i

s

p

9084

Vertical orientation displays characters as shown above (in this example, “Disp”). Use this orientation when a frame has cards positioned vertically.

D i s p

9084

Horizontal orientation displays characters as shown above (in this example, “Disp”). Use this orientation when a frame has cards positioned horizontally.

Figure 3-4 Card Edge Display Orientation

1.Access the Displ (Display) menu.

2.Select between Horizontal or Vertical as shown below.

Card Edge Control Menu:

Disp

1		2
H/V
		Horz	Horizontal orientation
		Vert	Vertical orientation

Adjust the display brightness as described below.

1.Access the Displ (Display) menu.

2.Select from the relative brightness levels as shown below.

Card Edge Control Menu:

Disp

1 2

BRGT

100%

53%

40%

27%

20%

13%

6.6%

3-6

9084 PRODUCT MANUAL

9084-OM (V4.0)

Image 30

Contents 9084 Cobalt Digital IncCopyright DisclaimerTrademark Information Table of Contents Operating Instructions Introduction OverviewCard Software Versions and this Manual SupportDownloads link atManual Conventions E201Safety Summary Labeling Symbol DefinitionsFunctional Description Input/OutputsProcessor VideoColor Corrector Frame Sync Function Color CorrectorVideo Processor AFD InserterCard Edge Controls Computer with NIC DashBoard Remote ControlUser Control Interface Controller CardOther cards installed in openGear frames such as the Cobalt Rear I/O Modules Video Formats Supported byRaster Structure Frame Rate Technical Specifications CharacteristicTechnical Specifications Introduction Warranty and Service Information Cobalt Digital Inc. Limited WarrantyFax Contact Cobalt Digital IncPhone Web General Information Technical SupportThis page intentionally blank Installation and Setup Installing the 9084 Into a Frame SlotInstalling the 9084 Into a Frame Slot Installation and Setup Installing a Rear I/O ModuleSetting Up 9084 Network Remote Control Rear I/O Module InstallationOperating Instructions Control and Display DescriptionsFunction Submenu/Parameter Submenu Overview Submenu a Submenu b Submenu z Individual ParametersCard Edge Controls, Indicators, and Display FunctionCard Edge Control Menu/Submenu Structure Menu Depth LEDsNone Submenu Depth Card Edge Setup Abbreviated DiagramVid ClrCS p DashBoard User Interface Set Enable to On Channel Black AdjCorrection Cobalt Remote Control Panel User Interfaces Control Panel Setup of Example Video Proc FunctionAccessing the 9084 Card via Remote Control Accessing the 9084 Card Using DashBoardAccessing the 9084 Card Using a Cobalt Remote Control Panel Checking 9084 Card Information Checking Card Using Info Card Edge ControlsPower Consumption and Temperature Displays Software Version NumberFormat Default Line No. / RangeAncillary Data Line Number Locations and Ranges Line No. Limiting FormatFunction Submenu List and Descriptions Function Submenu ItemLuma Gain Reset to UnityVideo Proc Luma LiftGang Luma and Color Gain Color PhaseColor Gain Black Hard ClipCard Edge Control Menu Applies white hard clip limiting at specified percentage50.0% to 109.1% null = 109.1% Applies white soft clip limiting at specified percentageOutput Code Output ModeIncoming AFD Output LineOperating Instructions Black Adj. Green Red BlueGang Black Level Controls White Adj. Green Red BlueGang Gamma Controls Framesync Enable Vertical Delay ControlHorizontal Delay Control Minimum Latency Frames Control Video Delay DisplayLoss of Input Signal Selection Framesync Status DisplayCustom Color Hue Reset FramesyncFramesync LOS Freeze Color Custom Color SaturationPreset Save and Load Preset Name field and Preset Save buttonPreset Load button and the Selected Preset Selected Preset drop-down listPreset Name Reset Current PresetFunction Parameter/Setting Video Proc Download PresetsOn-Set Monitor Color Correction Example Color and Video Correction Examples UsingFeed To Switcher Anchor Desk Set with Monitor10 Uncorrected Uncompensated Monitor Waveform To Switcher From Monitor Video Feed 12 Applying Correction to Example Monitor Waveform Signal Condition Observed On Waveform Monitor Correction Using Miscellaneous Color and Video Correction ExamplesLuma gain less than 100% level as shown below for VAR10.PNG VAR10A.PNG Troubleshooting Error and Failure Indicator OverviewCharacter Alphanumeric Display Card Edge Status/Error Indicators and DisplayStatus/Error Input Format Indicators Indicators AlphanumericDashBoard Status/Error Indicators and Displays Indicator Icon or Display Error Description15 Selecting Specific Cards for Card Info Status Display Basic Troubleshooting Checks ChecksProcessing Error Troubleshooting Symptom Error/Condition Corrective ActionTroubleshooting Network/Remote Control Errors Case of ProblemsPage 2406 E. University Ave. Urbana, IL 9084-OM