Cobalt Networks manual Installation and Setup, Installing the 9084 Into a Frame Slot

Chapter 2

Installation and Setup

Overview

This chapter contains the following information:

•Installing the 9084 Into a Frame Slot (p. 2-1)

•Installing a Rear I/O Module (p. 2-3)

•Setting Up 9084 Network Remote Control (p. 2-4)

Installing the 9084 Into a Frame Slot

CAUTION

Heat and power distribution requirements within a frame may dictate specific slot placement of cards. Cards with many heat-producing components should be arranged to avoid areas of excess heat build-up, particularly in frames using only convection cooling. The 9084 has a moderate power dissipation (15 W max.). As such, avoiding placing the card adjacent to other cards with similar dissipation values if possible.

CAUTION

This device contains semiconductor devices which are susceptible to serious damage from Electrostatic Discharge (ESD). ESD damage may not be immediately apparent and can affect the long-term reliability of the device.

Avoid handling circuit boards in high static environments such as carpeted areas, and when wearing synthetic fiber clothing. Always use proper ESD handling precautions and equipment when working on circuit boards and related equipment.

9084-OM (V4.0) 9084 PRODUCT MANUAL 2-1