Citizen Systems CBM-270 user manual ESC ! n

CBM-270 User’s Manual

ESC ! n

[Function]	Collective specifying the printing mode
[Code]	<1B> H <21> H <n>
[Range]	0 ≤ n ≤ 255
[Outline]	Printing mode is assigned. Each n bit indicates the following:
	Bit	Function		Value
			0		1
	0	Character Font	Font A		Font B
	1	Undefined
	2	Undefined
	3	High-lighting	Canceled		Specified
	4	Double height	Canceled		Specified
	5	Double width	Canceled		Specified
	6	Undefined
	7	Underline	Canceled		Specified

[Caution] ∙ With double height and double width being specified simultaneously, double wide and double high characters are consisted.

∙An underline is attached to the full character width, which, however, is not attached to the part having been skipped by the horizontal tab. Neither is it attached to 90°-right-turned

characters.

∙The underline width is as having been specified by <ESC - >. (The default setting is 1 dot width. )

∙Specification with this command is invalid to Kanji, except specification and cancellation of highlighting

∙In case that double wide character and normal character exist in same one line, the layout of underline is consistent one.

[Default]	n = 0
[See Also]	ESC E, ESC −

[Sample Program]

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H00) ; "H" ;

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H01) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H08) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H10) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H20) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H80) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&HB9) ; "H";

LPRINT CHR$ (&HA) ;

END

[Print Results]