
|
|
|
|
ESC @ |
|
[Function] | Initializing the printer |
[Code] | <1B> H <40> H |
[Outline] | Clears data stored in the print buffer and brings various settings to the initial state (Default |
| state). |
[Caution] | ∙ Data inside the internal input buffer are not cleared. |
| ∙ Dip switches setting are red once again. |
[Sample Program]
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H30) ;
LPRINT CHR$ (&H1B) ; "V" ; CHR$ (1) ;
LPRINT "AAA" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; "@" ;
LPRINT "AAA" ; CHR$ (&HA) ;
[Print Results]
Each setting has been initialized by the reset command.
ESC D [ n ] k NUL
[Function] | Setting horizontal tab position |
|
|
[Code] | <1B> H <44> H [<n>] k <00> H |
|
|
[Range] | 1 ≤ n ≤ 255 |
|
|
| 0 ≤ k ≤ 32 |
|
|
[Outline] | Specifying a horizontal tab position. |
|
|
| ∙ "n" indicates the no. of columns from the beginning to the horizontal tab position. At this | ||
| time, n= set position− 1 is to be specified. For example, to set the position at 9th column, | ||
| n=8 is to be specified. |
|
|
| ∙ k denotes the number of horizontal tab positions you want to set. | ||
| ∙ The tab position is set at position where it is "character width x n" from the line beginning. | ||
| The character width, at this time, includes the rightward space amount. In double wide | ||
| characters, it is made double of the ordinary case. | ||
| ∙ Tab positions can be specified are maximum 32. Specifying exceeding this is ignored. | ||
| ∙ <n> k, which denotes a setting position, is input in the increasing order and ends at <00> | ||
| H. |
|
|
| ∙ ESC D NUL clears all the set tab positions. Following clearing, horizontal tab command | ||
| is ignored. |
|
|
[Caution] | When the data, <n> k, is equal to or smaller than its preceding data, <n> | ||
| that tab setting is finished. If this is the case, the next data onward will be processed as | ||
| normal data. |
|
|
| When the data, <n> k, exceeds a | ||
| "Set digit position = Maximum print digits + 1." The horizontal tab position does not change | ||
| even if the character width is altered after setting the horizontal tab position. | ||
[Default] | ∙ Initial value is specified for each eight characters(9th.17th.25th.33rd columns) of Font A. | ||
[See Also] | HT |
|
|
[Sample Program] | [Print Results] | ||
ESC E n | See Sample Program and Print Results for HT on Page 46. | ||
|
|
| |
[Function] | Specifying/Canceling highlighting |
|
|
[Code] | <1B> H <45> H <n> |
|
|
[Outline] | Specifying/canceling the highlighting characters. | ||
| ∙ "n" is valid only for the lowest bit (n0). |