T | Names and functions of each part | |
| CAUTION • When opening the cover, open it all the way. | |
| If only part way open, the cover could slam shut, | |
| possibly causing injury. | |
| • Be careful of the edge of the cover when the cover | |
| is opened. It may cause injury or property | |
| damage. | |
| • Be careful of the edges of the plates so injury or | |
| property damage is possible. | |
1) | Cover | |
| Opens to allow loading of the paper and ribbon. | |
2) | Ribbon holder | |
| To attach the ribbon. (See Chapter 3 Paper and Ribbon.) | |
| 3) | Ribbon winder |
|
| To wind the ribbon. (See Chapter 3 Paper and Ribbon.) |
| 4) | Roll holder |
|
| Holds the roll of paper. |
| 5) | Roll guide |
|
| Guides the roll paper to be set on the roll holder. The roll guide can be |
|
| adjusted in accordance with the width of the paper. |
| 6) | Paper holder |
|
| Holds the roll holder which is inserted in the paper core. |
| 7) | Open lever |
|
| To swing the print head out of the way when loading the paper or cleaning |
|
| the print head. |
| 8) | Offset verification window |
|
| Allows you to check the position of the print head which must be adjusted to |
|
| the thickness of the paper used. (See Chapter 3 Paper and Ribbon.) |